EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Mechanical, Thermal, and Tribological Properties of 3D-Printed Nylon (PA6) Hybrid Composites Reinforced with MWCNTs and Carbon Fibers

Palaiam Siddikali, P. S. Rama Sreekanth

Journal of Composites Science · 24.03.2025 · 9 (4) · 155

DOI: 10.3390/jcs9040155 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 24.03.2025. Verfasst von Palaiam Siddikali und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensionally-printed carbonfiber-reinforced composites are increasingly replacing thermosetting polymers and metals due to their lightweight structure and enhanced mechanical performance. This investigation examines the mechanical, thermal and tribological characteristics of 3D-printed nylon (PA6) composites reinforced with 0.5 wt.% multi-walled carbon nanotubes (MWCNTs), 15 wt.% short carbon fibers (CF), and a hybrid combination of both, consisting of 0.5 wt.% MWCNTs and 15 wt.% CF. This study focuses on evaluating the individual and synergistic effects of these reinforcements on the performance of nylon-based composites. A series of characterizations, including mechanical, thermal, tribological, morphological and FTIR analyses, are conducted. The tensile and flexural strengths of the hybrid composite are improved by 35% and 42%, respectively, compared to pure nylon. The findings emphasize the substantial influence of hybrid reinforcement on enhancing mechanical, thermal, and tribological properties, providing useful information on the possible utilization of these composites in engineering applications requiring high-performance materials.

Zitieren

APA

Siddikali, P., & Sreekanth, P. S. R. (2025). Evaluation of Mechanical, Thermal, and Tribological Properties of 3D-Printed Nylon (PA6) Hybrid Composites Reinforced with MWCNTs and Carbon Fibers. Journal of Composites Science, 9(4), 155. https://doi.org/10.3390/jcs9040155

Vancouver

Siddikali P, Sreekanth PSR. Evaluation of Mechanical, Thermal, and Tribological Properties of 3D-Printed Nylon (PA6) Hybrid Composites Reinforced with MWCNTs and Carbon Fibers. Journal of Composites Science. 2025;9(4):155. doi:10.3390/jcs9040155

BibTeX
@article{Siddikali2025,
  author = {Siddikali, Palaiam and Sreekanth, P. S. Rama},
  title = {Evaluation of Mechanical, Thermal, and Tribological Properties of 3D-Printed Nylon (PA6) Hybrid Composites Reinforced with MWCNTs and Carbon Fibers},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {4},
  pages = {155},
  doi = {10.3390/jcs9040155}
}
Kostenlos starten →