EUVIMEDEUVIMED entdecken
Crossref

Surface‐Modified Carbon Fiber Reinforced MC PA6 Composites With Enhanced Mechanical and Tribological Properties

Li Wang, Yao Wang, Bingyan Wang, Shuyue Feng, Yanfang Zhao, Kun Chen

Polymer Composites · 10.11.2026

DOI: 10.1002/pc.71813 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 10.11.2026. Verfasst von Li Wang und 5 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Monomer‐cast polyamide 6 (MC PA6) is promising for lightweight sliding components but requires improved load‐bearing capacity and wear resistance. Modified carbon fibers (P‐CF) were prepared by acetone desizing, NaOH activation, and PA6 precursor‐derived coating. MC PA6/P‐CF composites with varying filler loadings were fabricated via in situ polymerization. P‐CF promoted heterogeneous nucleation and crystallization and improved thermal stability. At 10 wt% P‐CF, tensile and notched impact strengths peaked, increasing by 18.4% and 27.1%, respectively, relative to neat MC PA6. At 15 wt% P‐CF, the storage modulus increased by 110.4%. The average friction coefficient and specific wear rate decreased by 15.4% and 14.0%, respectively. At matched fiber loadings, P‐CF composites exhibited higher strengths and lower friction coefficients and specific wear rates than composites containing unmodified carbon fibers. Fracture and wear morphologies supported improved fiber‐matrix compatibility associated with the precursor‐derived coating. Fiber load sharing, crack deflection, and constrained matrix deformation contributed to the mechanical and tribological improvements. This strategy provides a viable route to improving the strength and wear resistance of MC PA6.

Zitieren

APA

Wang, L., Wang, Y., Wang, B., Feng, S., Zhao, Y., & Chen, K. (2026). Surface‐Modified Carbon Fiber Reinforced MC PA6 Composites With Enhanced Mechanical and Tribological Properties. Polymer Composites. https://doi.org/10.1002/pc.71813

Vancouver

Wang L, Wang Y, Wang B, Feng S, Zhao Y, Chen K. Surface‐Modified Carbon Fiber Reinforced MC PA6 Composites With Enhanced Mechanical and Tribological Properties. Polymer Composites. 2026. doi:10.1002/pc.71813

BibTeX
@article{Wang2026,
  author = {Wang, Li and Wang, Yao and Wang, Bingyan and Feng, Shuyue and Zhao, Yanfang and Chen, Kun},
  title = {Surface‐Modified Carbon Fiber Reinforced MC PA6 Composites With Enhanced Mechanical and Tribological Properties},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71813}
}
Kostenlos starten →