EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Design and Optimization of Machining-Induced Cutting Force and Its Effect on Surface Roughness during Milling of Fiber-Reinforced Polymer Composites

B. R. N. Murthy, S. R. Harisha, G. Divya Deepak, Pavan Hiremath

Journal of Composites Science · 04.09.2024 · 8 (9) · 346

DOI: 10.3390/jcs8090346 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 04.09.2024. Verfasst von B. R. N. Murthy und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we performed milling machining on carbon-epoxy polymer composites and jute-epoxy composites using a CNC vertical machining center. We focused on spindle speed, feed rate, depth of cut, and flute number and analyzed the cutting force and surface roughness. The optimal parameter combination to reduce cutting force in both composites was as follows: S = 600 rpm, FR = 100 mm/min, DOC = 0.25 mm, and FN = 6. The jute-epoxy composites required less cutting force (11.85 N/m2) compared to the carbon-epoxy composites (18.77 N/m2). The average surface roughness of the carbon-epoxy composites (6.685 µm) is higher than that of the jute-epoxy composites (3.08 µm). The type of reinforced material used greatly affects the cutting force and surface roughness during milling.

Zitieren

APA

Murthy, B. R. N., Harisha, S. R., Deepak, G. D., & Hiremath, P. (2024). Experimental Design and Optimization of Machining-Induced Cutting Force and Its Effect on Surface Roughness during Milling of Fiber-Reinforced Polymer Composites. Journal of Composites Science, 8(9), 346. https://doi.org/10.3390/jcs8090346

Vancouver

Murthy BRN, Harisha SR, Deepak GD, Hiremath P. Experimental Design and Optimization of Machining-Induced Cutting Force and Its Effect on Surface Roughness during Milling of Fiber-Reinforced Polymer Composites. Journal of Composites Science. 2024;8(9):346. doi:10.3390/jcs8090346

BibTeX
@article{Murthy2024,
  author = {Murthy, B. R. N. and Harisha, S. R. and Deepak, G. Divya and Hiremath, Pavan},
  title = {Experimental Design and Optimization of Machining-Induced Cutting Force and Its Effect on Surface Roughness during Milling of Fiber-Reinforced Polymer Composites},
  journal = {Journal of Composites Science},
  year = {2024},
  volume = {8},
  number = {9},
  pages = {346},
  doi = {10.3390/jcs8090346}
}
Kostenlos starten →