EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D-Printed Glycolyzed Polyethylene Terephthalate Reinforced with Carbon-Fiber Composites by the FDM Process

Mohamed Daly, Mostapha Tarfaoui, Mountasar Bouali, Amine Bendarma

Journal of Composites Science · 22.03.2024 · 8 (4) · 115

DOI: 10.3390/jcs8040115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 22.03.2024. Verfasst von Mohamed Daly und 3 weiteren Autor:innen. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The impacts of infill patterns and densities on the mechanical characteristics of items created by material extrusion additive manufacturing systems were investigated in this study. It is crucial to comprehend how these variables impact a printed object’s mechanical characteristics. This work examined two infill patterns and four densities of 3D-printed polyethylene terephthalate reinforced with carbon-fiber specimens for their tensile characteristics. Rectilinear and honeycomb infill designs were compared at 100%, while each had the following three infill densities: 20%, 50%, and 75%. As predicted, the findings revealed that as the infill densities increased, all analyzed infill patterns’ tensile strengths and Young’s moduli also increased. The design with a 75% honeycomb and 100% infill density has the highest Young’s modulus and tensile strength. The honeycomb was the ideal infill pattern, with 75% and 100% densities, providing significant strength and stiffness.

Zitieren

APA

Daly, M., Tarfaoui, M., Bouali, M., & Bendarma, A. (2024). Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D-Printed Glycolyzed Polyethylene Terephthalate Reinforced with Carbon-Fiber Composites by the FDM Process. Journal of Composites Science, 8(4), 115. https://doi.org/10.3390/jcs8040115

Vancouver

Daly M, Tarfaoui M, Bouali M, Bendarma A. Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D-Printed Glycolyzed Polyethylene Terephthalate Reinforced with Carbon-Fiber Composites by the FDM Process. Journal of Composites Science. 2024;8(4):115. doi:10.3390/jcs8040115

BibTeX
@article{Daly2024,
  author = {Daly, Mohamed and Tarfaoui, Mostapha and Bouali, Mountasar and Bendarma, Amine},
  title = {Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D-Printed Glycolyzed Polyethylene Terephthalate Reinforced with Carbon-Fiber Composites by the FDM Process},
  journal = {Journal of Composites Science},
  year = {2024},
  volume = {8},
  number = {4},
  pages = {115},
  doi = {10.3390/jcs8040115}
}
Kostenlos starten →