Monitoring and Evaluation of Corrosion at the Interface of Zirconium Alloy Biomaterials Under Simulated Oxidative Biological Environment
International Journal of Molecular Sciences · 2025
DOI: 10.3390/ijms262110537 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2025. Verfasst von Lidia Benea und 3 weiteren Autor:innen. Beteiligte Einrichtung: Competences Centre-Interfaces-Tribocorrosion-Electrochemical Systems (CC-ITES), "Dunărea de Jos" University of Galați, 47 Domneasca Street, 800008 Ga…. Hauptthemen laut MEDLINE: Zirconium, Alloys, Biocompatible Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The present work investigates the electrochemical behavior of the Zr2.5Nb alloy in a biomedical context, emphasizing the influence of electrochemical oxidation treatment on its stability in simulated physiological environments. The alloy samples were oxidized in 1 M H2SO4 under controlled voltages (200–275 V) and times (1 min), identifying 200 V–1 min as the optimal condition for obtaining a uniform porous oxide layer with an average pore diameter of ~90 nm. The corrosion resistance was evaluated using open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) in Ringer’s solution and Ringer’s solution containing 40 g/L H2O2 to simulate physiological and inflammatory conditions. Electrochemical tests revealed that electrochemically oxidized samples exhibited a polarization resistance up to 14.78 MΩ·cm2, about 26 times higher than that of the untreated alloy (0.56 MΩ·cm2). After 77 h of immersion, the oxidized alloy maintained a high resistance (17.54 MΩ·cm2), confirming long-term stability. Scanning Electron Microscopy (SEM–EDX) and X-Ray Diffraction (XRD) analyses highlighted significant increases in oxygen content and the transformation from the monoclinic baddeleyite to the cubic arkelite phase of ZrO2, contributing to enhanced corrosion resistance. These findings demonstrate that controlled electrochemical oxidation significantly improves the durability of Zr2.5Nb alloy in oxidative environments, supporting its potential for long-term biomedical implant applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Competences Centre-Interfaces-Tribocorrosion-Electrochemical Systems (CC-ITES), "Dunărea de Jos" University of Galați, 47 Domneasca Street, 800008 Galați, Romania.
- Interdisciplinary Research Centre in the Field of Eco-Nano Technology and Advance Materials CC-ITI, Faculty of Engineering, "Dunărea de Jos" University of Galați, 47 Domneasca Street, 800008 Galați, Romania.
- Center for Research and Technology Transfer in the Medico-Pharmaceutical Field, "Dunărea de Jos" University, 800008 Galați, Romania.
- Department of Pharmaceutical Sciences, Faculty of Medicine and Pharmacy, "Dunărea de Jos" University, 800008 Galați, Romania.
ORCID-Profile: Lidia Benea, Elena Roxana Axente
Zitieren
APA
Benea, L., Neaga, V., Bogatu, N., & Axente, E. R. (2025). Monitoring and Evaluation of Corrosion at the Interface of Zirconium Alloy Biomaterials Under Simulated Oxidative Biological Environment. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms262110537
Vancouver
Benea L, Neaga V, Bogatu N, Axente ER. Monitoring and Evaluation of Corrosion at the Interface of Zirconium Alloy Biomaterials Under Simulated Oxidative Biological Environment. International Journal of Molecular Sciences. 2025. doi:10.3390/ijms262110537
BibTeX
@article{Benea2025,
author = {Benea, Lidia and Neaga, Veaceslav and Bogatu, Nicoleta and Axente, Elena Roxana},
title = {Monitoring and Evaluation of Corrosion at the Interface of Zirconium Alloy Biomaterials Under Simulated Oxidative Biological Environment},
journal = {International Journal of Molecular Sciences},
year = {2025},
doi = {10.3390/ijms262110537}
}
EUVIMED