The Use of Electrochemical Methods to Determine the Effect of Nitrides of Alloying Elements on the Electrochemical Properties of Titanium β-Alloys
International Journal of Molecular Sciences · 2023
DOI: 10.3390/ijms24021656 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Jitřenka Jírů und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metals and Corrosion Engineering, University of Chemistry and Technology, Technická 5, 16628 Prague, Czech Republic. Hauptthemen laut MEDLINE: Titanium, Alloys. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education Youth and Sports, Ministry of Education, Youth and Sports of the Czech Republic.
Abstract (Originalsprache)
Titanium beta alloys represent the new generation of materials for the manufacturing of joint implants. Their Young’s modulus is lower and thus closer to the bone tissue compared to commonly used alloys. The surface tribological properties of these materials should be improved by ion implantation. The influence of this surface treatment on corrosion behaviour is unknown. The surface of Ti-36Nb-6Ta, Ti-36Nb-4Zr, and Ti-39Nb titanium β-alloys was modified using nitrogen ion implantation. X-ray photoelectron spectroscopy was used for surface analysis, which showed the presence of titanium, niobium, and tantalum nitrides in the treated samples and the elimination of less stable oxides. Electrochemical methods, electrochemical impedance spectra, polarisation resistance, and Mott–Schottky plot were measured in a physiological saline solution. The results of the measurements showed that ion implantation does not have a significant negative effect on the corrosion behaviour of the material. The best results of the alloys investigated were achieved by the Ti-36Nb-6Ta alloy. The combination of niobium and tantalum nitrides had a positive effect on the corrosion resistance of this alloy. After surface treatment, the polarization resistance of this alloy increased, 2.3 × 106 Ω·cm2, demonstrating higher corrosion resistance of the alloy. These results were also supported by the results of electrochemical impedance spectroscopy.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Metals and Corrosion Engineering, University of Chemistry and Technology, Technická 5, 16628 Prague, Czech Republic.
- Department of Physics, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technicka 4, 16607 Prague, Czech Republic.
ORCID-Profile: Jitřenka Jírů, Jaroslav Fojt
Förderung
- Ministry of Education Youth and Sports
- Ministry of Education, Youth and Sports of the Czech Republic
Zitieren
APA
Jírů, J., Hybášek, V., Vlčák, P., & Fojt, J. (2023). The Use of Electrochemical Methods to Determine the Effect of Nitrides of Alloying Elements on the Electrochemical Properties of Titanium β-Alloys. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24021656
Vancouver
Jírů J, Hybášek V, Vlčák P, Fojt J. The Use of Electrochemical Methods to Determine the Effect of Nitrides of Alloying Elements on the Electrochemical Properties of Titanium β-Alloys. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24021656
BibTeX
@article{Jr2023,
author = {Jírů, Jitřenka and Hybášek, Vojtěch and Vlčák, Petr and Fojt, Jaroslav},
title = {The Use of Electrochemical Methods to Determine the Effect of Nitrides of Alloying Elements on the Electrochemical Properties of Titanium β-Alloys},
journal = {International Journal of Molecular Sciences},
year = {2023},
doi = {10.3390/ijms24021656}
}
EUVIMED