EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Negative mixing enthalpy medium-entropy Ti–Zr–Nb–Al alloys with ultrahigh elastic admissible strain, strength-elongation product, and biocompatibility for bone implant applications

Zhaolin Hua, Dechuang Zhang, Lin Guo, Sihan Lin, Xiaokai Zhang, Yuncang Li, Cuie Wen

Acta Biomaterialia · 2025

DOI: 10.1016/j.actbio.2025.03.030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Biomaterialia, 2025. Verfasst von Zhaolin Hua und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China. Hauptthemen laut MEDLINE: Alloys, Materials Testing, Biocompatible Materials, Zirconium. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, National Natural Science Foundation of China, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Beta-type Ti-Zr-Nb (TZN) medium-entropy alloys (MEAs) are being extensively investigated as orthopedic implants due to their metallic mechanical properties, corrosion resistance, and biocompatibility. However, improvements in elastic admissible strain, strength, and ductility are still needed to ensure their high performance in clinical applications. In this study, we designed a series of negative mixing enthalpy MEAs by adding 0, 3, 5, 7, and 10 at.% aluminum (Al) to equimolar TZN alloy (denoted TZNAx (x = 0, 3, 5, 7 and 10)). These alloys were fabricated by arc melting followed by cold-rolling and annealing, and their microstructure, mechanical properties, wear and corrosion resistance, and biocompatibility were systematically studied. In general, the TZNAx MEAs showed significantly improved elastic admissible strain and strength-elongation product compared with those of CP-Ti and Ti64; in particular, the TZNA5 exhibited the best combination of mechanical properties with an elastic modulus of ∼54.6 GPa, a yield strength of ∼1040 MPa, an ultimate strength of ∼1132 MPa, and an elongation of ∼21 %. The wear resistance of the TZNAx MEAs increased with increasing Al content. The TZNAx MEAs showed an extremely low corrosion rate of 124-587 nm /year in Hanks' solution due to the formation of a surface passivation film composed of TiO2, ZrO2, Nb2O5 and Al2O3 oxides. The TZNAx MEAs also showed a relative cell viability of more than 95 % toward MG-63 cells. Overall, the TZNA5 MEA has significant potential as an orthopedic implant material due to its exceptional and comprehensive mechanical properties, high wear and corrosion resistance, and adequate biocompatibility. STATEMENT OF SIGNIFICANCE: This work reports on negative mixing enthalpy Ti-Zr-Nb-Al medium-entropy alloys (MEAs) with superior elastic admissible strain, strength-elongation product, and biocompatibility. The TZNA5 MEA exhibited the best combination of biomechanical properties. The wear resistance of the TZNAx MEAs increased with increasing Al content. The TZNAx MEAs showed high corrosion resistance in Hanks' solution due to the formation of a surface passivation film composed of TiO2, ZrO2, Nb2O5 and Al2O3 oxides. The TZNAx MEAs showed a relative cell viability of more than 95 % toward MG-63 cells. Overall, the TZNA5 MEA has significant potential as an orthopedic implant material due to its exceptional and comprehensive mechanical properties, high wear and corrosion resistance, and adequate biocompatibility.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlloysMaterials TestingBiocompatible MaterialsZirconiumEntropyTitaniumProstheses and ImplantsNiobiumStress, MechanicalAluminumHumansCorrosionElastic ModulusAnimals

Stichwörter der Autor:innen

BiocompatibilityElastic admissible strainMedium entropy alloyNegative mixing enthalpyTi–Zr–Nb–Al

Substanzen

AlloysBiocompatible MaterialsZirconiumTitaniumNiobiumAluminum

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China.
  • School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China. Electronic address: dczhang@xtu.edu.cn.
  • Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University, Shanghai, 200011 China. Electronic address: linsihan0729@126.com.
  • APT Medical Inc., Xiangtan 411105, China.
  • Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, 3001 Australia.
  • Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, 3001 Australia. Electronic address: cuie.wen@rmit.edu.au.

Förderung

  • Australian Research Council
  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation

Zitieren

APA

Hua, Z., Zhang, D., Guo, L., Lin, S., Zhang, X., Li, Y., & Wen, C. (2025). Negative mixing enthalpy medium-entropy Ti–Zr–Nb–Al alloys with ultrahigh elastic admissible strain, strength-elongation product, and biocompatibility for bone implant applications. Acta Biomaterialia. https://doi.org/10.1016/j.actbio.2025.03.030

Vancouver

Hua Z, Zhang D, Guo L, Lin S, Zhang X, Li Y, et al. Negative mixing enthalpy medium-entropy Ti–Zr–Nb–Al alloys with ultrahigh elastic admissible strain, strength-elongation product, and biocompatibility for bone implant applications. Acta Biomaterialia. 2025. doi:10.1016/j.actbio.2025.03.030

BibTeX
@article{Hua2025,
  author = {Hua, Zhaolin and Zhang, Dechuang and Guo, Lin and Lin, Sihan and Zhang, Xiaokai and Li, Yuncang and Wen, Cuie},
  title = {Negative mixing enthalpy medium-entropy Ti–Zr–Nb–Al alloys with ultrahigh elastic admissible strain, strength-elongation product, and biocompatibility for bone implant applications},
  journal = {Acta Biomaterialia},
  year = {2025},
  doi = {10.1016/j.actbio.2025.03.030}
}
Kostenlos starten →