EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices

Mathias Stahl Kavai, José Alberto Fracassi da Silva

Hardware · 2026-04-08 · 4 (2) · 8

DOI: 10.3390/hardware4020008 ↗

At a glance

Journal article in Hardware, published online on 2026-04-08. Written by Mathias Stahl Kavai and 1 co-authors. Cited 2 times so far (Crossref); 22 references. The full text is freely available (open access, CC BY 4.0). Funded by: São Paulo Research Foundation, CAPES, National Council for Scientific and Technological Development.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Lab-on-a-chip devices offer high efficiency, low volume and fast analytical measurement, but their use is still niche. A key component for these devices is the detector, and one common type of detection is fluorescence spectroscopy. However, in some cases the detector can be bulky and lose the appeal of small-footprint devices. To make lab-on-a-chip devices truly compact, detectors must also be compact. In this paper we discuss the use of simple and low-cost commercial multispectral sensors for use in lab-on-a-chip devices, more specifically for fluorescence detection, which we demonstrate to allow detection on nanomolar scale with a simple experimental setup.

Funding

  • São Paulo Research Foundation
  • CAPES
  • National Council for Scientific and Technological Development

Cite

APA

Kavai, M. S., & Silva, J. A. F. D. (2026). Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices. Hardware, 4(2), 8. https://doi.org/10.3390/hardware4020008

Vancouver

Kavai MS, Silva JAFD. Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices. Hardware. 2026;4(2):8. doi:10.3390/hardware4020008

BibTeX
@article{Kavai2026,
  author = {Kavai, Mathias Stahl and Silva, José Alberto Fracassi da},
  title = {Application of a Low-Cost Fluorescence Detector for 3D-Printed Lab-on-a-Chip Microdevices},
  journal = {Hardware},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {8},
  doi = {10.3390/hardware4020008}
}
Start for free →