EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Photocatalytic Microreactors: Architected Materials, Lab-on-Chip Devices, and Multiscale Reactor Design

George Kenanakis

Micro · 04.08.2026 · 6 (3) · 62

DOI: 10.3390/micro6030062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micro, online erschienen am 04.08.2026. Verfasst von George Kenanakis. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Exploit4InnoMat.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing [AM; three-dimensional (3D) printing] is reshaping heterogeneous photocatalysis by enabling architected materials and devices that span from centimeter-scale monoliths to micro- and lab-on-chip reactors. Heterogeneous photocatalysts have traditionally been deployed as powders or simple coatings, which offer high activity but suffer from mass-transfer limitations, poor light utilization and difficult recovery. Three-dimensional (3D) printing now allows precise control over macroscopic geometry, internal channel networks and micro-/nano-scale surface texturing, creating structured photocatalysts and microreactors that can be tailored for specific photon and flow fields. In contrast to recent reviews that primarily survey materials development or additive-manufacturing routes, this work focuses on photocatalytic microreactors and lab-on-chip devices as multi-scale reactors in which catalyst composition, architected geometry, photon management and hydrodynamics are co-designed across length scales. We summarize three-dimensional 3D-printed photocatalytic systems based on polymer–oxide composites, ceramic scaffolds such as zinc oxide (ZnO)/titanium dioxide (TiO2) clay monoliths, and laser-written titanium dioxide (TiO2) nano-architectures, with particular emphasis on microfluidic and lab-on-chip implementations fabricated by fused deposition modeling (FDM), direct ink writing (DIW), stereolithography (SLA), digital light processing (DLP) and laser direct writing (LDW). Based on the literature data and representative case studies, we examine how architected lattices, sponges and microreactor chips affect key performance metrics—apparent rate constants, apparent quantum yield (AQY) and space–time yield (STY)—for the degradation of dyes, antibiotics, detergents and other emerging contaminants in realistic matrices, and we compile reported values to illustrate emerging performance trends and limitations. Representative case studies highlight 3D-printed manganese-doped zinc oxide (Mn:ZnO)-decorated sponges used as modular cartridges for greywater and detergent treatment, as well as laser-written titanium dioxide (TiO2) nano-photocatalysts integrated into microchannels to couple structured light fields with controlled residence times. Finally, we outline materials and process challenges—including ultraviolet (UV) aging of polymer supports, the energy intensity of ceramic sintering and the lack of standardized testing protocols—and identify future research directions formulti-scalee modeling and techno-economic evaluation of three-dimensional (3D)-printed photocatalytic microreactors and devices.

Förderung

  • Exploit4InnoMat

Zitieren

APA

Kenanakis, G. (2026). 3D-Printed Photocatalytic Microreactors: Architected Materials, Lab-on-Chip Devices, and Multiscale Reactor Design. Micro, 6(3), 62. https://doi.org/10.3390/micro6030062

Vancouver

Kenanakis G. 3D-Printed Photocatalytic Microreactors: Architected Materials, Lab-on-Chip Devices, and Multiscale Reactor Design. Micro. 2026;6(3):62. doi:10.3390/micro6030062

BibTeX
@article{Kenanakis2026,
  author = {Kenanakis, George},
  title = {3D-Printed Photocatalytic Microreactors: Architected Materials, Lab-on-Chip Devices, and Multiscale Reactor Design},
  journal = {Micro},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {62},
  doi = {10.3390/micro6030062}
}
Kostenlos starten →