EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Leveraging Deep Learning and Generative AI for Predicting Rheological Properties and Material Compositions of 3D Printed Polyacrylamide Hydrogels

Sakib Mohammad iD, Rafee Akand, Kaden M Cook iD, Sabrina Nilufar, Farhan Chowdhury iD

Gels · 15.10.2024 · 10 (10) · 660

DOI: 10.3390/gels10100660 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 15.10.2024. Verfasst von Sakib Mohammad und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical, Computer, and Biomedical Engineering, Southern Illinois University Carbondale, Carbondale, IL 62901, USA. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, National Science Foundation, NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Artificial intelligence (AI) has the ability to predict rheological properties and constituent composition of 3D-printed materials with appropriately trained models. However, these models are not currently available for use. In this work, we trained deep learning (DL) models to (1) predict the rheological properties, such as the storage (G’) and loss (G”) moduli, of 3D-printed polyacrylamide (PAA) substrates, and (2) predict the composition of materials and associated 3D printing parameters for a desired pair of G’ and G”. We employed a multilayer perceptron (MLP) and successfully predicted G’ and G” from seven gel constituent parameters in a multivariate regression process. We used a grid-search algorithm along with 10-fold cross validation to tune the hyperparameters of the MLP, and found the R2 value to be 0.89. Next, we adopted two generative DL models named variational autoencoder (VAE) and conditional variational autoencoder (CVAE) to learn data patterns and generate constituent compositions. With these generative models, we produced synthetic data with the same statistical distribution as the real data of actual hydrogel fabrication, which was then validated using Student’s t-test and an autoencoder (AE) anomaly detector. We found that none of the seven generated gel constituents were significantly different from the real data. Our trained DL models were successful in mapping the input–output relationship for the 3D-printed hydrogel substrates, which can predict multiple variables from a handful of input variables and vice versa.

Schlagwörter

Stichwörter der Autor:innen

3D printingdeep learninggenerative AIpolyacrylamiderheology

Autor:innen und Institutionen

  • School of Electrical, Computer, and Biomedical Engineering, Southern Illinois University Carbondale, Carbondale, IL 62901, USA.
  • School of Mechanical, Aerospace, and Materials Engineering, Southern Illinois University Carbondale, Carbondale, IL 62901, USA.

ORCID-Profile: Sakib Mohammad, Kaden M Cook, Farhan Chowdhury

Förderung

  • NIGMS NIH HHS
  • National Science Foundation
  • NIH HHS
  • National Institutes of Health

Zitieren

APA

Mohammad, S., Akand, R., Cook, K. M., Nilufar, S., & Chowdhury, F. (2024). Leveraging Deep Learning and Generative AI for Predicting Rheological Properties and Material Compositions of 3D Printed Polyacrylamide Hydrogels. Gels, 10(10), 660. https://doi.org/10.3390/gels10100660

Vancouver

Mohammad S, Akand R, Cook KM, Nilufar S, Chowdhury F. Leveraging Deep Learning and Generative AI for Predicting Rheological Properties and Material Compositions of 3D Printed Polyacrylamide Hydrogels. Gels. 2024;10(10):660. doi:10.3390/gels10100660

BibTeX
@article{Mohammad2024,
  author = {Mohammad, Sakib and Akand, Rafee and Cook, Kaden M and Nilufar, Sabrina and Chowdhury, Farhan},
  title = {Leveraging Deep Learning and Generative AI for Predicting Rheological Properties and Material Compositions of 3D Printed Polyacrylamide Hydrogels},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {10},
  pages = {660},
  doi = {10.3390/gels10100660}
}
Kostenlos starten →