3D-Printed Alginate-Based Hydrogels with Appropriate Rheological Properties and Efficient Development of Cell Spheroids
Polymers · 21.06.2025 · 17 (13) · 1730
DOI: 10.3390/polym17131730 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.06.2025. Verfasst von Alida Mazzoli und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Science and Engineering of Matter, Environment and Urban Planning (SIMAU), Università Politecnica delle Marche, UdR INSTM, Via Brecce B…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR), European Union—NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem, Università Politecnica delle Marche.
Abstract (Originalsprache)
In the last years, considerable innovation has been made regarding bioprinting, particularly in the development of cell-loaded hydrogels. The specific properties of the bioinks are crucial for printing an adequate cell-laden hydrogel structure. In this research, we aimed to develop a 3D-printable hydrogel using a natural biocompatible polymer. The process is based on the use of sodium alginate subjected to calcium ion cross-linking for immediate stiffness after printing. Using the Cellink INKREDIBLE+ printer (Cellink Inc., Goteborg, Sweden), 3D structures were successfully produced. The developed bioink exhibited a viscosity suitable for extrusion printing while ensuring its structural integrity at the same time. Next, 3D spheroids developed by using bioinks were morphologically characterized by using light, a fluorescent microscope, and field emission scanning electron microscopy (FESEM). In conclusion, the properties of the construct obtained using the lab-formulated biocompatible polymer hydrogel suggest its potential use as a framework for three-dimensional cell culture, with possible applications in both fields of research and regenerative medicine.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Science and Engineering of Matter, Environment and Urban Planning (SIMAU), Università Politecnica delle Marche, UdR INSTM, Via Brecce Bianche, 60131 Ancona, Italy.
- Department of Experimental and Clinical Medicine, Università Politecnica delle Marche, Via Tronto 10/A, 60121 Ancona, Italy.
- Department of Industrial Engineering and Mathematical Sciences (DIISM), Università Politecnica delle Marche, Via Brecce Bianche, 60131 Ancona, Italy.
- Department of Civil and Environmental Engineering, University of Perugia, UdR INSTM, Strada di Pentima 4, 05100 Terni, Italy.
- Center of Obesity, United Hospitals-University of Ancona, 60020 Ancona, Italy.
- Dipartimento di Scienze della Vita e dell'Ambiente (DISVA), Università Politecnica delle Marche, Via Brecce Bianche, 60131 Ancona, Italy.
ORCID-Profile: Stefania Greco, Francesca Luzi, Maria Caterina Evangelisti, Abel Duménigo González, Valeria Corinaldesi, Debora Puglia, Saverio Cinti, Paolo Moretti, Pasquapina Ciarmela
Förderung
- European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR)
- European Union—NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem
- Università Politecnica delle Marche
- Università degli Studi di Perugia
- MUR
Zitieren
APA
Mazzoli, A., Greco, S., Luzi, F., Evangelisti, M. C., González, A. D., Corinaldesi, V., Caragiuli, M., Rallini, M., Puglia, D., Cinti, S., Moretti, P., Torre, L., & Ciarmela, P. (2025). 3D-Printed Alginate-Based Hydrogels with Appropriate Rheological Properties and Efficient Development of Cell Spheroids. Polymers, 17(13), 1730. https://doi.org/10.3390/polym17131730
Vancouver
Mazzoli A, Greco S, Luzi F, Evangelisti MC, González AD, Corinaldesi V, et al. 3D-Printed Alginate-Based Hydrogels with Appropriate Rheological Properties and Efficient Development of Cell Spheroids. Polymers. 2025;17(13):1730. doi:10.3390/polym17131730
BibTeX
@article{Mazzoli2025,
author = {Mazzoli, Alida and Greco, Stefania and Luzi, Francesca and Evangelisti, Maria Caterina and González, Abel Duménigo and Corinaldesi, Valeria and Caragiuli, Manila and Rallini, Marco and Puglia, Debora and Cinti, Saverio and Moretti, Paolo and Torre, Luigi and Ciarmela, Pasquapina},
title = {3D-Printed Alginate-Based Hydrogels with Appropriate Rheological Properties and Efficient Development of Cell Spheroids},
journal = {Polymers},
year = {2025},
volume = {17},
number = {13},
pages = {1730},
doi = {10.3390/polym17131730}
}
EUVIMED