Deterministic Timer–DMA Motion Control for Embedded Hybrid CNC and Additive Manufacturing Systems
Electronics · 25.04.2026 · 15 (9) · 1830
DOI: 10.3390/electronics15091830 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 25.04.2026. Verfasst von Nikola Jovanovski und 3 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Hybrid CNC and additive manufacturing platforms often rely on host-assisted or otherwise overdimensioned control architectures to achieve deterministic multi-axis motion, increasing system cost and complexity. This paper presents a fully microcontroller-based timer–DMA motion execution architecture that eliminates the need for external processors or FPGA-based execution, enabling deterministic multi-axis synchronization under the tested conditions in a simpler, more cost-effective way. The proposed framework integrates motion planning, precise step-time computation, and hardware-assisted pulse generation within a unified embedded control architecture. The main novelty lies in the systematic use of timer and DMA peripherals to offload time-critical pulse execution from the microcontroller core, allowing it to focus on motion planning and precise step-time computation. Unlike segmentation-based approaches, the duration of each individual step is calculated directly without fixed-interval segmentation, enabling high motion resolution while avoiding per-step interrupts that introduce jitter at high motion speeds. The architecture was validated on a hybrid platform capable of both milling and material extrusion. Experimental results confirmed real-time feasibility within practical on-chip memory limits and demonstrated very small interpolation errors caused mainly by timer quantization, comparable to those observed in host-processor-based motion systems. Machining and additive-manufacturing experiments further confirmed stable execution and accurate trajectory tracking under real operating conditions.
Zitieren
APA
Jovanovski, N., Kjosev, J., Raleva, K., & Gerazov, B. (2026). Deterministic Timer–DMA Motion Control for Embedded Hybrid CNC and Additive Manufacturing Systems. Electronics, 15(9), 1830. https://doi.org/10.3390/electronics15091830
Vancouver
Jovanovski N, Kjosev J, Raleva K, Gerazov B. Deterministic Timer–DMA Motion Control for Embedded Hybrid CNC and Additive Manufacturing Systems. Electronics. 2026;15(9):1830. doi:10.3390/electronics15091830
BibTeX
@article{Jovanovski2026,
author = {Jovanovski, Nikola and Kjosev, Josif and Raleva, Katerina and Gerazov, Branislav},
title = {Deterministic Timer–DMA Motion Control for Embedded Hybrid CNC and Additive Manufacturing Systems},
journal = {Electronics},
year = {2026},
volume = {15},
number = {9},
pages = {1830},
doi = {10.3390/electronics15091830}
}
EUVIMED