The Impact of Cement Type on the Fracture Resistance of CAD-CAM Resin-Matrix Ceramic Anterior Crowns
Dentistry Journal · 12.08.2026 · 14 (8) · 512
DOI: 10.3390/dj14080512 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 12.08.2026. Verfasst von Carlos A Jurado und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Dental Medicine, Ponce Health Sciences University, Ponce 00716, Puerto Rico. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: This in vitro study evaluated the fracture resistance of computer-aided design and computer-aided manufacturing (CAD-CAM) resin-matrix ceramic crowns cemented with three adhesive resin cements and three novel resin-modified glass ionomer cements.
Methods
Ninety crowns representing a maxillary left central incisor were milled from a resin-based nanoceramic hybrid material (Cerasmart, GC) using a chairside CAD-CAM system (Primescan). The typodont preparation included 1.5-mm incisal reduction, 1.5-mm axial reduction, and a 1.0-mm chamfer finish line. Crowns were cemented onto 3D-printed dies of the preparation and assigned to six groups (n = 15 per group) according to cement type: Multilink Automix (ReMu), Panavia V5 (RePa), RelyX Unicem 2 (ReUn), RelyX Luting Plus (GiLu), GC FujiCem Evolve (GiEv), and Meron Plus QM (GiMe). The cemented restorations were subjected to artificial aging with 10,000 thermocycles at 5 to 55 °C with a dwell time of 30 s. Specimens were loaded in compression to fracture. Scanning electron microscopy (SEM) was used to evaluate fracture patterns. Fracture load was analyzed using one-way ANOVA and post hoc Tukey honestly significant difference (HSD) test (p = 0.001).
Results
Fracture resistance differed significantly among cement types. Crowns cemented with adhesive resin cements exhibited higher fracture resistance than those cemented with resin-modified glass ionomer cements. The highest fracture resistance was observed for ReUn, followed by RePa and ReMu, whereas GiEv and GiLu showed the lowest values.
Conclusions
CAD-CAM hybrid crowns fabricated from a resin composite–ceramic material demonstrated higher fracture resistance when cemented with adhesive resin cements than with the novel resin-modified glass ionomer cements tested. Among the six cements, ReUn produced the highest fracture resistance, whereas GiEv produced the lowest.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Dental Medicine, Ponce Health Sciences University, Ponce 00716, Puerto Rico.
- Department of Bioscience Research, College of Dentistry, The University of Tennessee Health Science Center, Memphis, TN 382014, USA.
- Department of Operative and Esthetic Dentistry, Faculty of Dentistry, University of Szeged, 6720 Szeged, Hungary.
ORCID-Profile: Carlos A Jurado, Franklin Garcia-Godoy, Mark A Antal
Zitieren
APA
Jurado, C. A., Garcia-Godoy, F., Morrow, B. R., & Antal, M. A. (2026). The Impact of Cement Type on the Fracture Resistance of CAD-CAM Resin-Matrix Ceramic Anterior Crowns. Dentistry Journal, 14(8), 512. https://doi.org/10.3390/dj14080512
Vancouver
Jurado CA, Garcia-Godoy F, Morrow BR, Antal MA. The Impact of Cement Type on the Fracture Resistance of CAD-CAM Resin-Matrix Ceramic Anterior Crowns. Dentistry Journal. 2026;14(8):512. doi:10.3390/dj14080512
BibTeX
@article{Jurado2026,
author = {Jurado, Carlos A and Garcia-Godoy, Franklin and Morrow, Brian R and Antal, Mark A},
title = {The Impact of Cement Type on the Fracture Resistance of CAD-CAM Resin-Matrix Ceramic Anterior Crowns},
journal = {Dentistry Journal},
year = {2026},
volume = {14},
number = {8},
pages = {512},
doi = {10.3390/dj14080512}
}
EUVIMED