Fracture Resistance of CAD/CAM Resin-Matrix Ceramic Overlays and Full-Coverage Crowns for Maxillary Premolars
Biomimetics · 22.04.2026 · 11 (5) · 291
DOI: 10.3390/biomimetics11050291 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 22.04.2026. Verfasst von Ali Abulkasim Mohamed und 7 weiteren Autor:innen. Beteiligte Einrichtung: Division of Operative Dentistry, Department of General Dentistry, College of Dentistry, University of Tennessee Health Science Center, Memphis, TN 38…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objective
CAD-CAM technology enables biomimetic dentistry by producing highly accurate, minimally invasive restorations that replicate the biomechanical behavior of intact teeth. This study evaluated the fracture resistance of overlays with margins at different supragingival levels, including a flat occlusal design and compared them with conventional full crowns. All restorations were fabricated from chairside CAD/CAM resin-matrix ceramic for maxillary premolars. Methods and Materials: Sixty-four CAD/CAM resin-matrix ceramic restorations were fabricated and randomly assigned to four groups (n = 16): (1) overlay with a margin 2 mm above the gingiva (Ov2m); (2) overlay with a 4 mm supragingival margin (Ov4m); (3) overlay with a 4 mm margin and flat occlusal surface (OvF4m); and (4) full-coverage crown with a gingival-level margin (FCC). Preparations were standardized by one operator. Restorations were adhesively cemented to resin dies, thermocycled 10,000 times (5–55 °C), and loaded to failure in a universal testing machine (1 mm/min). Data were analyzed using one-way ANOVA and post hoc tests (α = 0.001).
Results
Among overlays, Ov2m showed the highest fracture resistance (1605 ± 88 N), followed by Ov4m (1403 ± 63 N). OvF4m recorded the lowest value (1257 ± 73 N). FCC exhibited the greatest overall resistance (1838 ± 106 N), significantly higher than that of any overlay group.
Conclusions
Overlays with margins 2 mm above the gingiva had higher fracture resistance than those with more coronal margins or flat occlusal designs. Full-coverage crowns showed the greatest strength, highlighting the impact of margin position and preparation design on restoration performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Operative Dentistry, Department of General Dentistry, College of Dentistry, University of Tennessee Health Science Center, Memphis, TN 38103, USA.
- Department of Bioscience Research, College of Dentistry, The University of Tennessee Health Science Center, Memphis, TN 38163, USA.
- College of Dentistry, University of Tennessee Health Science Center, Memphis, TN 38103, USA.
- School of Dental Medicine, Ponce Health Sciences University, Ponce 00732, Puerto Rico.
- Department of Operative and Esthetic Dentistry, Faculty of Dentistry, University of Szeged, 6720 Szeged, Hungary.
- Division of Dental Biomaterials, Department of Clinical and Community Sciences, School of Dentistry, University of Alabama at Birmingham, Birmingham, AL 35233, USA.
ORCID-Profile: Brian Morrow, Carlos A Jurado, Mark A Antal, Silvia Rojas-Rueda
Zitieren
APA
Mohamed, A. A., Morrow, B., Mireles, S., Jurado, C. A., Antal, M. A., Rojas-Rueda, S., Nurrohman, H., & Garcia-Godoy, F. (2026). Fracture Resistance of CAD/CAM Resin-Matrix Ceramic Overlays and Full-Coverage Crowns for Maxillary Premolars. Biomimetics, 11(5), 291. https://doi.org/10.3390/biomimetics11050291
Vancouver
Mohamed AA, Morrow B, Mireles S, Jurado CA, Antal MA, Rojas-Rueda S, et al. Fracture Resistance of CAD/CAM Resin-Matrix Ceramic Overlays and Full-Coverage Crowns for Maxillary Premolars. Biomimetics. 2026;11(5):291. doi:10.3390/biomimetics11050291
BibTeX
@article{Mohamed2026,
author = {Mohamed, Ali Abulkasim and Morrow, Brian and Mireles, Stella and Jurado, Carlos A and Antal, Mark A and Rojas-Rueda, Silvia and Nurrohman, Hamid and Garcia-Godoy, Franklin},
title = {Fracture Resistance of CAD/CAM Resin-Matrix Ceramic Overlays and Full-Coverage Crowns for Maxillary Premolars},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {5},
pages = {291},
doi = {10.3390/biomimetics11050291}
}
EUVIMED