EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Sintering Process Parameters by Taguchi Method for Developing Al-CNT-Reinforced Powder Composites

Navin Kumar, Shatrughan Soren, Rakesh Prasad, Yashvir Singh, Hemant Nautiyal, Abhishek Sharma, Sew Sun Tiang, Wei Hong Lim

Crystals · 06.09.2023 · 13 (9) · 1352

DOI: 10.3390/cryst13091352 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 06.09.2023. Verfasst von Navin Kumar und 7 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In powder metallurgy, the sintering process is a high-power consuming and critical process for better mechanical properties of composites due to proper diffusion of atoms. In this context, different sintering processes were investigated along with their sintering condition. The present work focused on optimizing conventional sintering process parameters for carbon nanotubes (CNTs) reinforced aluminum composites using Taguchi optimization methods. The Taguchi L9 orthogonal array (OA) experiment was considered for the investigation. CNT’s wt.%, sintering temperature, and time were chosen as process parameters in the sintering process, while macro-hardness and relative density were evaluated as performance evaluation characteristics. The signal-to-noise ratio (S/N) and ANOVA statistical procedures were utilized to evaluate the effect of sintering parameters/levels on the micro-hardness and relative density of the Al/CNTs composite sintered. ANOVA statistical analyses revealed that the CNTs wt.% significantly influences relative density (83.58%), followed by temperature (14.58%), whereas CNTs wt.% significantly influenced micro-hardness (77.75%), followed by temperature (13.64%). The sintering of Al/CNTs composites using these optimum conditions is recommended to reduce power consumption and enhance the quality of the sintered composite.

Zitieren

APA

Kumar, N., Soren, S., Prasad, R., Singh, Y., Nautiyal, H., Sharma, A., Tiang, S. S., & Lim, W. H. (2023). Optimization of Sintering Process Parameters by Taguchi Method for Developing Al-CNT-Reinforced Powder Composites. Crystals, 13(9), 1352. https://doi.org/10.3390/cryst13091352

Vancouver

Kumar N, Soren S, Prasad R, Singh Y, Nautiyal H, Sharma A, et al. Optimization of Sintering Process Parameters by Taguchi Method for Developing Al-CNT-Reinforced Powder Composites. Crystals. 2023;13(9):1352. doi:10.3390/cryst13091352

BibTeX
@article{Kumar2023,
  author = {Kumar, Navin and Soren, Shatrughan and Prasad, Rakesh and Singh, Yashvir and Nautiyal, Hemant and Sharma, Abhishek and Tiang, Sew Sun and Lim, Wei Hong},
  title = {Optimization of Sintering Process Parameters by Taguchi Method for Developing Al-CNT-Reinforced Powder Composites},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1352},
  doi = {10.3390/cryst13091352}
}
Kostenlos starten →