EUVIMEDEUVIMED entdecken
Crossref

Optimization of Wood-Based Birch Plywood CO2 Laser Engraving Process Parameters with Taguchi Method

Mehmet Güneş, Çağatay Ersin

Black Sea Journal of Engineering and Science · 15.09.2024 · 7 (5) · 946-953

DOI: 10.34248/bsengineering.1529803 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Black Sea Journal of Engineering and Science, online erschienen am 15.09.2024. Verfasst von Mehmet Güneş und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the optimization of the parameters used in the engraving process of wooden birch plywood material with a CO2 laser machine was investigated using the Taguchi method. An industrial laser machine with a 150W glass tube was used during the experimental examination process. There are basic factors affecting the engraving process of wooden surfaces such as laser power (P), engraving speed (S) and laser head parts (F). The engraving depth (D) and engraving width formed on the surface during the engraving process are the main factors that determine the aesthetics of the product. Taguchi L25 orthogonal array was used in the experiments to determine and optimize the highly important parameters. The optimum combination of parameters in the laser engraving process was then evaluated. The research results showed that the effect of P and S factors played a leading role, and the F parameter had a small effect on the depth of wood scraping. Optimization results found that F:5, S:100 and P:30 gave the best engraving depth optimization, while F:6, S:300 and P:10 gave the lowest engraving depth optimization result.

Zitieren

APA

Güneş, M., & Ersin, Ç. (2024). Optimization of Wood-Based Birch Plywood CO2 Laser Engraving Process Parameters with Taguchi Method. Black Sea Journal of Engineering and Science, 7(5), 946-953. https://doi.org/10.34248/bsengineering.1529803

Vancouver

Güneş M, Ersin Ç. Optimization of Wood-Based Birch Plywood CO2 Laser Engraving Process Parameters with Taguchi Method. Black Sea Journal of Engineering and Science. 2024;7(5):946-953. doi:10.34248/bsengineering.1529803

BibTeX
@article{Gne2024,
  author = {Güneş, Mehmet and Ersin, Çağatay},
  title = {Optimization of Wood-Based Birch Plywood CO2 Laser Engraving Process Parameters with Taguchi Method},
  journal = {Black Sea Journal of Engineering and Science},
  year = {2024},
  volume = {7},
  number = {5},
  pages = {946--953},
  doi = {10.34248/bsengineering.1529803}
}
Kostenlos starten →