EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Processing Parameters of Powder Metallurgy for Preparing AZ31/GNP Nanocomposites Using Taguchi Method

Sachin Kumar Sharma, Lozica Ivanović, Sandra Gajević, Lokesh Kumar Sharma, Yogesh Sharma, Slavica Miladinović, Blaža Stojanović

Applied Sciences · 10.04.2025 · 15 (8) · 4181

DOI: 10.3390/app15084181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.04.2025. Verfasst von Sachin Kumar Sharma und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The systematic optimization approach highlights the potential of powder metallurgy and GNP reinforcement to enhance the mechanical properties of AZ31 magnesium alloys, making them suitable for lightweight structural applications. The present study employs the Taguchi approach to optimize the processing parameters of powder metallurgy for the fabrication of AZ31/graphene nanoplatelet (1.75 wt.%GNP) composites. The process parameters are varied at three levels, i.e., compaction pressure (250 MPa, 300 MPa, and 350 MPa), sintering temperature (500 °C, 550 °C, and 600 °C), and sintering time (45 min, 60 min, and 75 min) using an L9 orthogonal array. The impact of these parameters on microhardness and compressive strength was analyzed using a signal-to-noise (SN) ratio and an analysis of variance (ANOVA) approach. The results indicate that compaction pressure significantly influences both microhardness (72.99%) and compressive strength (68.38%), followed by sintering temperature and sintering time. Optimal parameter combinations (350 MPa, 600 °C, and 60 min) yielded maximum microhardness (108.5 Hv) and compressive strength (452.2 MPa). Regression models demonstrated strong predictive capabilities with R² values exceeding 85%. This study underscores the importance of efficient parameter optimization to achieve enhanced material properties in a cost-effective manner.

Zitieren

APA

Sharma, S. K., Ivanović, L., Gajević, S., Sharma, L. K., Sharma, Y., Miladinović, S., & Stojanović, B. (2025). Optimization of Processing Parameters of Powder Metallurgy for Preparing AZ31/GNP Nanocomposites Using Taguchi Method. Applied Sciences, 15(8), 4181. https://doi.org/10.3390/app15084181

Vancouver

Sharma SK, Ivanović L, Gajević S, Sharma LK, Sharma Y, Miladinović S, et al. Optimization of Processing Parameters of Powder Metallurgy for Preparing AZ31/GNP Nanocomposites Using Taguchi Method. Applied Sciences. 2025;15(8):4181. doi:10.3390/app15084181

BibTeX
@article{Sharma2025,
  author = {Sharma, Sachin Kumar and Ivanović, Lozica and Gajević, Sandra and Sharma, Lokesh Kumar and Sharma, Yogesh and Miladinović, Slavica and Stojanović, Blaža},
  title = {Optimization of Processing Parameters of Powder Metallurgy for Preparing AZ31/GNP Nanocomposites Using Taguchi Method},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {4181},
  doi = {10.3390/app15084181}
}
Kostenlos starten →