EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predictive Modeling and Optimization of Cladding Efficiency and Cladding Angle in Coaxial Laser Cladding of Stellite 12 on WC9 Steel

Yu Zhang, Yang Zhang, Yan Yin, Hao Zhang

Coatings · 04.07.2026 · 16 (7) · 799

DOI: 10.3390/coatings16070799 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 04.07.2026. Verfasst von Yu Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Industry & Trade Vocational College.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the impact of laser cladding process parameters on the forming quality of single-pass, multi-track Stellite 12 alloy coatings on WC9 steel surfaces. Using a Central Composite Design (CCD), mathematical predictive models for cladding efficiency and cladding angle were developed by varying the input process parameters, including laser power, scanning speed, powder feed rate, and overlap ratio. The interactive effects of process parameters on the selected response variables were analyzed. The results indicate that cladding efficiency is most significantly governed by the powder feed rate, and a higher efficiency can be achieved by concurrently increasing both the laser power and powder feed rate. Regarding the cladding angle, the scanning speed plays a dominant role, where appropriately increasing the scanning speed effectively increases the cladding angle by mitigating local mass accumulation. Afterwards, an optimal combination of process parameters was obtained through multi-objective optimization aimed at maximizing both the cladding efficiency and the cladding angle. Experimental validation using the optimized parameters yielded a coating with satisfactory forming quality, with relative errors between the predicted and experimental values for cladding efficiency and cladding angle being 7.22% and 8.81%, respectively. This work provides valuable theoretical guidance for the prediction and control of cladding efficiency and cladding angle of multi-track laser-clad Stellite 12 coatings on WC9 steel surfaces.

Förderung

  • Zhejiang Industry & Trade Vocational College

Zitieren

APA

Zhang, Y., Zhang, Y., Yin, Y., & Zhang, H. (2026). Predictive Modeling and Optimization of Cladding Efficiency and Cladding Angle in Coaxial Laser Cladding of Stellite 12 on WC9 Steel. Coatings, 16(7), 799. https://doi.org/10.3390/coatings16070799

Vancouver

Zhang Y, Zhang Y, Yin Y, Zhang H. Predictive Modeling and Optimization of Cladding Efficiency and Cladding Angle in Coaxial Laser Cladding of Stellite 12 on WC9 Steel. Coatings. 2026;16(7):799. doi:10.3390/coatings16070799

BibTeX
@article{Zhang2026,
  author = {Zhang, Yu and Zhang, Yang and Yin, Yan and Zhang, Hao},
  title = {Predictive Modeling and Optimization of Cladding Efficiency and Cladding Angle in Coaxial Laser Cladding of Stellite 12 on WC9 Steel},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {799},
  doi = {10.3390/coatings16070799}
}
Kostenlos starten →