EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Effect of Laser Power on the Microstructure and Properties of Cladding Stellite 12 Coatings on H13 Steel

Qianjie Wang, Xuedao Shu iD, Haijie Xu, Sheng Xu, Song Zhang iD

Materials · 13.12.2024 · 17 (24) · 6098

DOI: 10.3390/ma17246098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.12.2024. Verfasst von Qianjie Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering & Mechanics, Ningbo University, Ningbo 315221, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Pioneer” and “Leading Goose” R&D Program of Zhejiang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issue of cracking in aluminum extrusion dies during operation, this study employs laser cladding technology to modify the surface of these dies. This modification aims to enhance their hardness and friction resistance. Laser cladding technology was utilized to coat the surface of H13 steel with Stellite 12, a cobalt-based alloy, at varying laser power levels. The surface formation quality, microstructural organization, phase composition, microhardness, and wear resistance of the coatings were investigated using optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction (XRD), microhardness testing, and confocal microscopy. The results indicated that as the laser power increased, the surface formation quality of the coating gradually improved, while the dilution rate of the coating increased. Changes in the phase composition and microstructure were not significant, and both microhardness and wear resistance initially increased before decreasing. Optimal process parameters for achieving good surface formation quality, high microhardness, and strong wear resistance were found to be a laser output power of 2200 W, scanning speed of 10 mm/s, feeding rate of 1.2 r/min, and overlap rate of 40%. The results indicate that the coating applied to the surface of H13 steel using Stellite 12 enhances the performance of aluminum extrusion dies.

Schlagwörter

Stichwörter der Autor:innen

H13 mold steelStellite 12 alloylaser claddingmicrostructurewear resistance

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering & Mechanics, Ningbo University, Ningbo 315221, China.
  • School of Information and Intelligent Engineering, Ningbo City College of Vocational Technology, Ningbo 315221, China.
  • College of Mechanical and Automotive Engineering, Ningbo University of Technology, Ningbo 315221, China.

ORCID-Profile: Xuedao Shu, Song Zhang

Förderung

  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang

Zitieren

APA

Wang, Q., Shu, X., Xu, H., Xu, S., & Zhang, S. (2024). Study on the Effect of Laser Power on the Microstructure and Properties of Cladding Stellite 12 Coatings on H13 Steel. Materials, 17(24), 6098. https://doi.org/10.3390/ma17246098

Vancouver

Wang Q, Shu X, Xu H, Xu S, Zhang S. Study on the Effect of Laser Power on the Microstructure and Properties of Cladding Stellite 12 Coatings on H13 Steel. Materials. 2024;17(24):6098. doi:10.3390/ma17246098

BibTeX
@article{Wang2024,
  author = {Wang, Qianjie and Shu, Xuedao and Xu, Haijie and Xu, Sheng and Zhang, Song},
  title = {Study on the Effect of Laser Power on the Microstructure and Properties of Cladding Stellite 12 Coatings on H13 Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6098},
  doi = {10.3390/ma17246098}
}
Kostenlos starten →