Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering
Materials · 20.09.2023 · 16 (18) · 6303
DOI: 10.3390/ma16186303 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 20.09.2023. Verfasst von Heda Bai und 12 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 164 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shenzhen Science and Technology Program, Guangdong Basic and Applied Basic Research Foundation.
Abstract (Originalsprache)
Chromium Nitride (CrN) coatings have widespread utilization across numerous industrial applications, primarily attributed to their excellent properties. Among the different methods for CrN coating synthesis, direct current magnetron sputtering (DCMS) has been the dominant technique applied. Nonetheless, with the expanded applications of CrN coatings, the need for enhanced mechanical performance is concurrently escalating. High-power impulse magnetron sputtering (HiPIMS), an innovative coating deposition approach developed over the past three decades, is gaining recognition for its capability of yielding coatings with superior mechanical attributes, thereby drawing significant research interest. Considering that the mechanical performance of a coating is fundamentally governed by its microstructural properties, a comprehensive review of CrN coatings fabricated through both techniques is presented. This review of recent literature aims to embark on an insightful comparison between DCMS and HiPIMS, followed by an examination of the microstructure of CrN coatings fabricated via both techniques. Furthermore, the exploration of the underlying factors contributing to the disparities in mechanical properties observed in CrN coatings is revealed. An assessment of the advantages and potential shortcomings of HiPIMS is discussed, offering insight into CrN coating fabrication.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
- Institute of Special Environments Physical Sciences, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
Förderung
- National Natural Science Foundation of China
- Shenzhen Science and Technology Program
- Guangdong Basic and Applied Basic Research Foundation
- Characteristic Innovation Project of Guangdong Educational Department
Zitieren
APA
Bai, H., Li, J., Gao, J., Ni, J., Bai, Y., Jian, J., Zhao, L., Bai, B., Cai, Z., He, J., Chen, H., Leng, X., & Liu, X. (2023). Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering. Materials, 16(18), 6303. https://doi.org/10.3390/ma16186303
Vancouver
Bai H, Li J, Gao J, Ni J, Bai Y, Jian J, et al. Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering. Materials. 2023;16(18):6303. doi:10.3390/ma16186303
BibTeX
@article{Bai2023,
author = {Bai, Heda and Li, Jin and Gao, Jialai and Ni, Jinyang and Bai, Yaxiong and Jian, Jie and Zhao, Lin and Bai, Bowen and Cai, Zeyun and He, Jianchao and Chen, Hongsheng and Leng, Xuesong and Liu, Xiangli},
title = {Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering},
journal = {Materials},
year = {2023},
volume = {16},
number = {18},
pages = {6303},
doi = {10.3390/ma16186303}
}
EUVIMED