EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Laser Cleaning on the Cr Coating on the Surface of Steel Tyre Moulds

Yuan Ren, Jianfeng Li, Yinghao Xue, Liming Wang, Xinqiang Ma, Yongmei Zhu, Xingwei Yao, Li Lin, Wei Cheng

Coatings · 21.08.2025 · 15 (8) · 978

DOI: 10.3390/coatings15080978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 21.08.2025. Verfasst von Yuan Ren und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of the People’s Republic of China, Shandong Province Science and Technology-based Small and Medium-sized Enterprise Innovation Capacity Enhancement Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the effect of laser cleaning on the chromium plating of steel tyre moulds, a solid-state laser with an average power of 500 W was used as the cleaning light source. By varying the energy density and the number of pulses applied to the exact location, the changes in the macro- and micro-morphology of the mould surface, surface element content, and chromium plating thickness before and after laser cleaning were studied. The results show that as the laser energy density increases, the cleaning effect improves significantly. However, when the energy density exceeds 1.02×104 mJ/cm2, cracks appear in the chrome-plated layer. By changing the number of pulses applied to a specific location, it was found that cracks also appear in the chrome-plated layer when the number of pulses exceeds three. These results provide a reference for the practical application of laser cleaning in the cleaning of chrome-plated steel tyre moulds.

Förderung

  • National Natural Science Foundation of the People’s Republic of China
  • Shandong Province Science and Technology-based Small and Medium-sized Enterprise Innovation Capacity Enhancement Project

Zitieren

APA

Ren, Y., Li, J., Xue, Y., Wang, L., Ma, X., Zhu, Y., Yao, X., Lin, L., & Cheng, W. (2025). The Effect of Laser Cleaning on the Cr Coating on the Surface of Steel Tyre Moulds. Coatings, 15(8), 978. https://doi.org/10.3390/coatings15080978

Vancouver

Ren Y, Li J, Xue Y, Wang L, Ma X, Zhu Y, et al. The Effect of Laser Cleaning on the Cr Coating on the Surface of Steel Tyre Moulds. Coatings. 2025;15(8):978. doi:10.3390/coatings15080978

BibTeX
@article{Ren2025,
  author = {Ren, Yuan and Li, Jianfeng and Xue, Yinghao and Wang, Liming and Ma, Xinqiang and Zhu, Yongmei and Yao, Xingwei and Lin, Li and Cheng, Wei},
  title = {The Effect of Laser Cleaning on the Cr Coating on the Surface of Steel Tyre Moulds},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {978},
  doi = {10.3390/coatings15080978}
}
Kostenlos starten →