EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Laser Cleaning of Graphite Lubrication Coating on the Magnesium Alloy Surface

Zhenhai Xu, Yunhui Yue, Donghe Zhang, Shaoxi Xue, Erju Liu, Debin Shan, Jie Xu, Bin Guo

Materials · 21.01.2025 · 18 (3) · 484

DOI: 10.3390/ma18030484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.01.2025. Verfasst von Zhenhai Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: CGN-HIT Advanced Nuclear and New Energy Research Institute, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CGN HIT Advanced Nuclear and New Energy Research Institute, National Key R&D Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The lubricating coating must be removed from the forged or stamped workpieces. Developing environment-friendly and high-precision cleaning technology is necessary. In this study, a nanosecond pulsed laser was used to clean the graphite lubricating coating of 15 μm thickness on the surface of an MB15 magnesium alloy. The effects of various laser cleaning parameters on the cleaning quality and the cleaning mechanism were studied. When the laser fluence (F) increases from 1.27 to 7.64 J/cm2, the clearance rate increases, and the surface roughness initially decreases before increasing. When the pulse frequency (f) increases from 10 to 30 kHz, the single-pulse energy decreases, the clearance rate decreases, and the surface roughness increases. When the scanning speed (v) increases from 1000 to 5000 mm/s, the spot overlap rate decreases, the clearance rate decreases, and the surface roughness firstly decreases and then increases. The optimal cleaning parameter combinations are F = 3.82 J/cm2, f = 10 kHz, and v = 3000 mm/s. The graphite lubrication coating was almost completely removed without damaging the substrate surface, and the surface carbon content of the sample was decreased to 6.42%. The laser cleaning mechanism of the graphite lubricating coating on the magnesium alloy surface is dominated by thermal ablation. As the laser fluence increases, the physical and chemical reactions become more violent.

Schlagwörter

Stichwörter der Autor:innen

graphite lubrication coatinglaser cleaningmagnesium alloyremoval mechanismroughnesssurface morphology

Autor:innen und Institutionen

  • CGN-HIT Advanced Nuclear and New Energy Research Institute, Harbin Institute of Technology, Harbin 150001, China.
  • Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450000, China.
  • National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China.

Förderung

  • CGN HIT Advanced Nuclear and New Energy Research Institute
  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • National Key R&D Program of China

Zitieren

APA

Xu, Z., Yue, Y., Zhang, D., Xue, S., Liu, E., Shan, D., Xu, J., & Guo, B. (2025). Research on Laser Cleaning of Graphite Lubrication Coating on the Magnesium Alloy Surface. Materials, 18(3), 484. https://doi.org/10.3390/ma18030484

Vancouver

Xu Z, Yue Y, Zhang D, Xue S, Liu E, Shan D, et al. Research on Laser Cleaning of Graphite Lubrication Coating on the Magnesium Alloy Surface. Materials. 2025;18(3):484. doi:10.3390/ma18030484

BibTeX
@article{Xu2025,
  author = {Xu, Zhenhai and Yue, Yunhui and Zhang, Donghe and Xue, Shaoxi and Liu, Erju and Shan, Debin and Xu, Jie and Guo, Bin},
  title = {Research on Laser Cleaning of Graphite Lubrication Coating on the Magnesium Alloy Surface},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {484},
  doi = {10.3390/ma18030484}
}
Kostenlos starten →