Effect of Different Laser Parameters on Surface Physical Characteristics and Corrosion Resistance of 20 Steel in Laser Cleaning
Applied Sciences · 01.03.2024 · 14 (5) · 2058
DOI: 10.3390/app14052058 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 01.03.2024. Verfasst von Chengzhi He und 7 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Project Program of Wuhan National Laboratory for Optoelectronics, School-enterprise Cooperation Project of Shenzhen Technology University, Shenzhen Key Project for Technology Development.
Abstract (Originalsprache)
The rusting of metals brings huge losses to the industry every year, and post-treatment of rusted metals to restore their properties to the initial state is a hot topic of current research. In particular, 20 steel, which is widely used in various structural components such as ships, is prone to oxidation in atmospheric environment. Therefore, in this study, a nanosecond pulsed laser was used to remove the rust layer on the surface of 20 steel. The effects of different energy densities and spot overlap rates on the roughness, surface morphology, chemical composition, microhardness and corrosion resistance of the rust layer were analyzed. The results showed that the best cleaning effect was achieved at an energy density of 4.26 J/cm2 and a spot overlap rate of 75%. Under these conditions, the rust layer was completely removed without damage to the substrate, and it even improved the corrosion resistance of 20 steel. At energy densities of 1.42 J/cm2 and 2.84 J/cm2, the rust layer was not completely removed, while at 5.68 J/cm2, the rust layer was removed but the substrate was damaged. In addition, the mechanism of rust removal and substrate damage is discussed.
Förderung
- Open Project Program of Wuhan National Laboratory for Optoelectronics
- School-enterprise Cooperation Project of Shenzhen Technology University
- Shenzhen Key Project for Technology Development
- Shenzhen Science and Technology Innovation Commission Project
- Stable Support Project of Shenzhen Higher Education Institutions
- Key Program of Natural Science Foundation of Shenzhen
Zitieren
APA
He, C., Yang, C., Yang, H., Wang, J., Liu, J., Deng, L., Fang, L., & Li, C. (2024). Effect of Different Laser Parameters on Surface Physical Characteristics and Corrosion Resistance of 20 Steel in Laser Cleaning. Applied Sciences, 14(5), 2058. https://doi.org/10.3390/app14052058
Vancouver
He C, Yang C, Yang H, Wang J, Liu J, Deng L, et al. Effect of Different Laser Parameters on Surface Physical Characteristics and Corrosion Resistance of 20 Steel in Laser Cleaning. Applied Sciences. 2024;14(5):2058. doi:10.3390/app14052058
BibTeX
@article{He2024,
author = {He, Chengzhi and Yang, Can and Yang, Huan and Wang, Jiayan and Liu, Jiani and Deng, Leimin and Fang, Licun and Li, Chunbo},
title = {Effect of Different Laser Parameters on Surface Physical Characteristics and Corrosion Resistance of 20 Steel in Laser Cleaning},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {5},
pages = {2058},
doi = {10.3390/app14052058}
}
EUVIMED