EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self-Etching Ceramic Primer Application Time Influences Durability of Bonding to Lithium Disilicate and Advanced Lithium Disilicate Ceramics

Ashwaq Alsolami, Khaled M. Alzahrani

Coatings · 17.11.2024 · 14 (11) · 1461

DOI: 10.3390/coatings14111461 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 17.11.2024. Verfasst von Ashwaq Alsolami und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam bin Abdulaziz University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Monobond Etch & Prime (MEP; Ivoclar) has a material-dependent effect on dental ceramics. This study evaluated the impact of MEP application time on the resin–ceramic shear bond strength (SBS) of lithium disilicate (LD) and advanced lithium disilicate (ALD) ceramics.

Methods

LD and ALD discs were distributed into four groups (n = 20): no surface treatment; 5% HF etching followed by the application of a silane-containing primer (S); MEP applied for 40 s and maintained for 20 s; MEP applied for 2 min and maintained for 40 s. Resin–ceramic SBS was evaluated at 24 h and after thermocycling. The statistical analysis of SBS was performed by using the three-way ANOVA and Tukey’s multiple comparisons tests. Additional ceramic samples were prepared to assess the surface topography.

Results

There was no statistically significant difference in the SBS of the MEP groups (20 s and 2 min) and HF + S. However, only the HF + S and MEP (2 min) groups showed durable adhesion after thermocycling. MEP resulted in less distinct surface alterations compared with HF etching.

Conclusion

Increasing the application time of MEP to 2 min resulted in more durable resin–ceramic adhesion compared with the application time (40 s) recommended by the manufacturer. The adhesion of resin–ceramic to LD and ALD did not significantly differ.

Förderung

  • Prince Sattam bin Abdulaziz University

Zitieren

APA

Alsolami, A., & Alzahrani, K. M. (2024). Self-Etching Ceramic Primer Application Time Influences Durability of Bonding to Lithium Disilicate and Advanced Lithium Disilicate Ceramics. Coatings, 14(11), 1461. https://doi.org/10.3390/coatings14111461

Vancouver

Alsolami A, Alzahrani KM. Self-Etching Ceramic Primer Application Time Influences Durability of Bonding to Lithium Disilicate and Advanced Lithium Disilicate Ceramics. Coatings. 2024;14(11):1461. doi:10.3390/coatings14111461

BibTeX
@article{Alsolami2024,
  author = {Alsolami, Ashwaq and Alzahrani, Khaled M.},
  title = {Self-Etching Ceramic Primer Application Time Influences Durability of Bonding to Lithium Disilicate and Advanced Lithium Disilicate Ceramics},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {11},
  pages = {1461},
  doi = {10.3390/coatings14111461}
}
Kostenlos starten →