EUVIMEDEUVIMED entdecken
Crossref

Prolonged application methods of self‐etching primer: Effect of aging on micro‐shear bond strength to lithium disilicate and zirconia‐reinforced lithium silicate ceramics

Camilo Pulido iD, Omaira Prieto-Torres, Cristhian Carvajal-Garzón, Andrés Dávila-Sánchez iD, Claudia Gonzalez-Vaca, Cesar Augusto Galvão Arrais

Journal of Prosthodontics · 2026-04 · 35 (4) · 585-594

DOI: 10.1111/jopr.70085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 11.01.2026. Verfasst von Camilo Pulido und 5 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Rehabilitación Oral, Escuela de Odontología, Universidad San Francisco de Quito USFQ, Quito, Ecuador. Hauptthemen laut MEDLINE: Ceramics, Dental Porcelain, Zirconium, Acid Etching, Dental. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To evaluate the effect of different self‐etching primer (Monobond Etch & Prime—MEP) application protocols and aging on micro shear bond strength (µSBS) and surface etching patterns of zirconia‐reinforced lithium silicate (ZLS) and lithium disilicate (LD) ceramics. Materials and Methods Twenty‐eight blocks of Vita Suprinity (VS), Celtra Duo (CD), and IPS e.max CAD (EM) were cut into two sections each ( n = 56 specimens per ceramic) and divided into groups: 5% hydrofluoric acid with silane (HF + S, control), and MEP scrubbing for 20, 40, and 60 s, with a 40‐s reaction time ( n = 14 per condition; n = 10 for µSBS and n = 4 for scanning electron microscopy [SEM]). For µSBS, resin cement was applied and light‐cured; half of the resin cylinders were stored for 24 h, while the other half underwent thermocycling (TC) (10,000 cycles; dwell time of 30 s between 5°C and 55°C) before testing. Data were analyzed using three‐way repeated measures analysis of variance (ANOVA) and Bonferroni post hoc tests ( α = 0.05).

Results

The HF + S group showed higher µSBS for EM than VS and CD ( p < 0.001). MEP100 achieved comparable µSBS with HF + S for CD ( p < 0.001) and improved µSBS for VS and EM ( p = 0.128). TC decreased the µSBS values in most groups. The only exception was observed when the VS and CD surfaces were treated with MEP100, and when the CD surface was treated with MEP80. Adhesive fractures were predominantly seen. SEM revealed MEP100 produced etching patterns like HF, with lithium metasilicate and orthophosphate crystals present.

Conclusions

Prolonged MEP application (MEP100) produced etching patterns and µSBS values comparable to HF + S, making it a viable surface treatment alternative for ZLS and LD ceramics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsDental PorcelainZirconiumAcid Etching, DentalShear StrengthSurface PropertiesDental BondingHumansMicroscopy, Electron, Scanning

Stichwörter der Autor:innen

CAD‐CAM ceramicself‐etching primershear bond strengthsurface treatmentzirconia‐reinforced lithium‐silicate

Substanzen

VITA Suprinitylithia disilicateDental Porcelainzirconium oxideZirconium

Autor:innen und Institutionen

  • Departamento de Rehabilitación Oral, Escuela de Odontología, Universidad San Francisco de Quito USFQ, Quito, Ecuador.
  • Department of Prosthodontics, Institución Universitaria Colegios de Colombia (UNICOC), Bogotá, Colombia.
  • Departamento de Odontología Restauradora, Escuela de Odontología, Universidad San Francisco de Quito USFQ, Quito, Ecuador.
  • Department of Restorative Dentistry, School of Dentistry, State University of Ponta Grossa, Paraná, Brazil.

ORCID-Profile: Camilo Pulido, Andrés Dávila-Sánchez

Zitieren

APA

Pulido, C., Prieto-Torres, O., Carvajal-Garzón, C., Dávila-Sánchez, A., Gonzalez-Vaca, C., & Arrais, C. A. G. (2026). Prolonged application methods of self‐etching primer: Effect of aging on micro‐shear bond strength to lithium disilicate and zirconia‐reinforced lithium silicate ceramics. Journal of Prosthodontics, 35(4), 585-594. https://doi.org/10.1111/jopr.70085

Vancouver

Pulido C, Prieto-Torres O, Carvajal-Garzón C, Dávila-Sánchez A, Gonzalez-Vaca C, Arrais CAG. Prolonged application methods of self‐etching primer: Effect of aging on micro‐shear bond strength to lithium disilicate and zirconia‐reinforced lithium silicate ceramics. Journal of Prosthodontics. 2026;35(4):585-594. doi:10.1111/jopr.70085

BibTeX
@article{Pulido2026,
  author = {Pulido, Camilo and Prieto-Torres, Omaira and Carvajal-Garzón, Cristhian and Dávila-Sánchez, Andrés and Gonzalez-Vaca, Claudia and Arrais, Cesar Augusto Galvão},
  title = {Prolonged application methods of self‐etching primer: Effect of aging on micro‐shear bond strength to lithium disilicate and zirconia‐reinforced lithium silicate ceramics},
  journal = {Journal of Prosthodontics},
  year = {2026},
  volume = {35},
  number = {4},
  pages = {585--594},
  doi = {10.1111/jopr.70085}
}
Kostenlos starten →