EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self-Etching Ceramic Primer Affects Surface Topography and Roughness of Two Zirconia-Reinforced Lithium Silicate Ceramics

Feras Alhalabi iD

European Journal of Dentistry · 2025-02 · 19 (01) · 055-060

DOI: 10.1055/s-0044-1787283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Dentistry, online erschienen am 11.10.2024. Verfasst von Feras Alhalabi. Beteiligte Einrichtung: Department of Conservative Dental Sciences, College of Dentistry, Prince Sattam Bin Abdul-Aziz University, Al-Kharj, Saudi Arabia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam bin Abdulaziz University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

This article evaluates the etching efficacy of a self-etching ceramic primer (SECP) on zirconia-reinforced lithium silicate (ZLS) ceramics. Materials and Methods Celtra Duo (DeguDent GmbH, Hanau-Wolfgang, Germany) and Vita Suprinity (Vita Zahnfabrik, Bad Säckingen, Germany) were used in this study. A total of 36 ceramic slices were prepared from each ceramic material and randomly distributed into three groups according to the surface treatment applied (n = 12 per group). Group 1 (polished) was polished with silicon carbide paper discs and did not undergo any surface treatment; group 2 (SECP) was surface treated with SECP (Monobond Etch and Prime, Ivoclar Vivadent, Schaan, Liechtenstein); group 3 (hydrofluoric acid [HF]) was surface treated with 4.7% HF etching. Half of the specimens (n = 6) from each group were gold-sputtered, and the surface topographic alterations were evaluated by scanning electron microscopy at magnifications of 5,000× and 10,000 × . The surface roughness of the other half (n = 6) from each group was tested using a three-dimensional optical profiler. Data were statistically analyzed using two-way analysis of variance and Tukey's multiple comparisons test.

Results

Both SECP and HF etching surface treatments resulted in a statistically significant increase (p < 0.05) in the surface roughness of both ceramic materials, compared to that of their respective control group specimens (polished). HF etching resulted in a significant dissolution of the glassy phase of each ceramic.

Conclusion

SECP can effectively etch ZLS ceramics. The etching patterns created after the application of SECP were mild compared to those produced by HF etching. The topographic surface features of ceramics are affected by both, surface treatment and material composition.

Autor:innen und Institutionen

  • Department of Conservative Dental Sciences, College of Dentistry, Prince Sattam Bin Abdul-Aziz University, Al-Kharj, Saudi Arabia.

ORCID-Profile: Feras Alhalabi

Förderung

  • Prince Sattam bin Abdulaziz University

Zitieren

APA

Alhalabi, F. (2025). Self-Etching Ceramic Primer Affects Surface Topography and Roughness of Two Zirconia-Reinforced Lithium Silicate Ceramics. European Journal of Dentistry, 19(01), 055-060. https://doi.org/10.1055/s-0044-1787283

Vancouver

Alhalabi F. Self-Etching Ceramic Primer Affects Surface Topography and Roughness of Two Zirconia-Reinforced Lithium Silicate Ceramics. European Journal of Dentistry. 2025;19(01):055-060. doi:10.1055/s-0044-1787283

BibTeX
@article{Alhalabi2025,
  author = {Alhalabi, Feras},
  title = {Self-Etching Ceramic Primer Affects Surface Topography and Roughness of Two Zirconia-Reinforced Lithium Silicate Ceramics},
  journal = {European Journal of Dentistry},
  year = {2025},
  volume = {19},
  number = {01},
  pages = {055--060},
  doi = {10.1055/s-0044-1787283}
}
Kostenlos starten →