A Comprehensive Review of Cathodic Arc Evaporation Physical Vapour Deposition (CAE-PVD) Coatings for Enhanced Tribological Performance
Coatings · 20.02.2024 · 14 (3) · 246
DOI: 10.3390/coatings14030246 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 20.02.2024. Verfasst von Musa Muhammed und 5 weiteren Autor:innen. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 180 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
In the realm of industries focused on tribology, such as the machining industry, among others, the primary objective has been tribological performance enhancement, given its substantial impact on production cost. Amid the variety of tribological enhancement techniques, cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings have emerged as a promising solution offering both tribological performance enhancement and cost-effectiveness. This review article aims to systematically present the subject of CAE-PVD coatings in light of the tribological performance enhancement. It commences with a comprehensive discussion on substrate preparation, emphasizing the significant effect of substrate roughness on the coating properties and the ensuing tribological performance. The literature analysis conducted revealed that optimum tribological performance could be achieved with an average roughness (Ra) of 0.1 µm. Subsequently, the article explores the CAE-PVD process and the coating’s microstructural evolution with emphasis on advances in macroparticles (MPs) formation and reduction. Further discussions are provided on the characterization of the coatings’ microstructural, mechanical, electrochemical and tribological properties. Most importantly, crucial analytical discussions highlighting the impact of deposition parameters namely: arc current, temperature and substrate bias on the coating properties are also provided. The examination of the analyzed literature revealed that the optimum tribological performance can be attained with a 70 to 100 A arc current, a substrate bias ranging from −100 to −200 V and a deposition temperature exceeding 300 °C. The article further explores advancements in coating doping, monolayer and multilayer coating architectures of CAE-PVD coatings. Finally, invaluable recommendations for future exploration by prospective researchers to further enrich the field of study are also provided.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Muhammed, M., Javidani, M., Sadrabadi, T. E., Heidari, M., Levasseur, T., & Jahazi, M. (2024). A Comprehensive Review of Cathodic Arc Evaporation Physical Vapour Deposition (CAE-PVD) Coatings for Enhanced Tribological Performance. Coatings, 14(3), 246. https://doi.org/10.3390/coatings14030246
Vancouver
Muhammed M, Javidani M, Sadrabadi TE, Heidari M, Levasseur T, Jahazi M. A Comprehensive Review of Cathodic Arc Evaporation Physical Vapour Deposition (CAE-PVD) Coatings for Enhanced Tribological Performance. Coatings. 2024;14(3):246. doi:10.3390/coatings14030246
BibTeX
@article{Muhammed2024,
author = {Muhammed, Musa and Javidani, Mousa and Sadrabadi, Tahere Ebrahimi and Heidari, Majid and Levasseur, Tom and Jahazi, Mohammad},
title = {A Comprehensive Review of Cathodic Arc Evaporation Physical Vapour Deposition (CAE-PVD) Coatings for Enhanced Tribological Performance},
journal = {Coatings},
year = {2024},
volume = {14},
number = {3},
pages = {246},
doi = {10.3390/coatings14030246}
}
EUVIMED