Environmental Impact of Physical Vapour Deposition and Plasma-Enhanced Chemical Vapour Deposition Technologies for Deposition of Diamond-like Carbon Coatings for Green Tribology
Coatings · 12.02.2025 · 15 (2) · 218
DOI: 10.3390/coatings15020218 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 12.02.2025. Verfasst von Larissa Ihara und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie, EPSRC grant titled Advanced Coatings Platform to Drive New High Value Engineering Processes and Products, ortuguese Foundation for Science and Technology (FCT) in the framework of Strategic Funding.
Abstract (Originalsprache)
With low friction and high hardness, diamond-like carbon (DLC) coatings are a prominent surface engineering solution for tribosystems in various applications. Their versatility stems from their varying composition, facilitated by different deposition techniques, which affect their properties. However, environmental impact is often overlooked in coating design. The objective of this paper is to assess the resource efficiency of four different common deposition techniques, thus identifying critical factors for sustainable DLC deposition. The coatings were deposited in one single chamber, enabling a direct comparison of the resource consumption of each technology. Expenditure of electric energy and consumables per volumetric output accounted for the environmental impact of manufacturing the coatings, which was evaluated across the indicators of damage to human health, damage to ecosystems, and resource scarcity. Electric energy use, dictated by deposition rate, was demonstrated to be the most significant factor contributing to the environmental impact. The environmental impact of PECVD and μW-PECVD was comparable and remarkably lower than that of dcMS and HiPIMS, the latter being the least energy efficient process, with the lowest output rate but highest energy expenditure. Thus, μW-PECVD could be considered the ‘greenest’ production method. These findings are consequential for coaters to efficiently produce good-quality DLCs with low environmental impact.
Förderung
- European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie
- EPSRC grant titled Advanced Coatings Platform to Drive New High Value Engineering Processes and Products
- ortuguese Foundation for Science and Technology (FCT) in the framework of Strategic Funding
Zitieren
APA
Ihara, L., Wu, G., Cavaleiro, A., Morina, A., & Yang, L. (2025). Environmental Impact of Physical Vapour Deposition and Plasma-Enhanced Chemical Vapour Deposition Technologies for Deposition of Diamond-like Carbon Coatings for Green Tribology. Coatings, 15(2), 218. https://doi.org/10.3390/coatings15020218
Vancouver
Ihara L, Wu G, Cavaleiro A, Morina A, Yang L. Environmental Impact of Physical Vapour Deposition and Plasma-Enhanced Chemical Vapour Deposition Technologies for Deposition of Diamond-like Carbon Coatings for Green Tribology. Coatings. 2025;15(2):218. doi:10.3390/coatings15020218
BibTeX
@article{Ihara2025,
author = {Ihara, Larissa and Wu, Guizhi and Cavaleiro, Albano and Morina, Ardian and Yang, Liuquan},
title = {Environmental Impact of Physical Vapour Deposition and Plasma-Enhanced Chemical Vapour Deposition Technologies for Deposition of Diamond-like Carbon Coatings for Green Tribology},
journal = {Coatings},
year = {2025},
volume = {15},
number = {2},
pages = {218},
doi = {10.3390/coatings15020218}
}
EUVIMED