EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Temperature on the Structure and Tribological Properties of Ti, TiN and Ti/TiN Coatings Deposited by Cathodic Arc PVD

Carolina Ortega-Portilla, Andrea Giraldo, Jorge Andrés Cardona, Alexander Ruden, Guillermo César Mondragón, Juan Pablo Trujillo, Arturo Gómez Ortega, Juan Manuel González-Carmona, Edgar Adrián Franco Urquiza

Coatings · 02.07.2024 · 14 (7) · 823

DOI: 10.3390/coatings14070823 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 02.07.2024. Verfasst von Carolina Ortega-Portilla und 8 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONAHCYT, CIDESI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Monolayers of Ti and TiN coatings, as well as a Ti/TiN bilayer coating, were deposited on AISI M2 steel substrates using the PVD cathodic arc technique. The coatings had a thickness close to 5 μm and an average roughness between 98.6 and 110.1 μm due to the presence of microdroplets on the surface. The crystalline structure of the materials was analyzed using Grazing Incidence X-ray Diffraction (GIXRD) with an increase in temperature to study the dynamics of oxide formation. A phase composition study was conducted using the Rietveld refinement method. At the temperatures where critical growth of titanium oxides, both anatase and rutile, was observed, pin-on-disk tests were performed to study the tribological properties of the materials at high temperatures. It was determined that the oxidation temperature of Ti is around 450 °C, promoting the formation of a combination of anatase and rutile. However, the formation of rutile inhibits the formation of anatase, which is stable above 600 °C. In contrast, TiN showed an oxidation temperature of 550 °C, with an exclusive growth of the rutile phase. The Ti/TiN bilayer exhibited mixed behavior, with the initial growth of anatase promoted by Ti, followed by the formation of rutile. Oxidation and tribo-oxidation dominated the wear behavior of the surfaces, showing a transition from mechanisms related to abrasion at low and medium temperatures to a combination of abrasion and adhesion mechanisms at high temperatures (800 °C).

Förderung

  • CONAHCYT
  • CIDESI

Zitieren

APA

Ortega-Portilla, C., Giraldo, A., Cardona, J. A., Ruden, A., Mondragón, G. C., Trujillo, J. P., Ortega, A. G., González-Carmona, J. M., & Urquiza, E. A. F. (2024). Effect of Temperature on the Structure and Tribological Properties of Ti, TiN and Ti/TiN Coatings Deposited by Cathodic Arc PVD. Coatings, 14(7), 823. https://doi.org/10.3390/coatings14070823

Vancouver

Ortega-Portilla C, Giraldo A, Cardona JA, Ruden A, Mondragón GC, Trujillo JP, et al. Effect of Temperature on the Structure and Tribological Properties of Ti, TiN and Ti/TiN Coatings Deposited by Cathodic Arc PVD. Coatings. 2024;14(7):823. doi:10.3390/coatings14070823

BibTeX
@article{OrtegaPortilla2024,
  author = {Ortega-Portilla, Carolina and Giraldo, Andrea and Cardona, Jorge Andrés and Ruden, Alexander and Mondragón, Guillermo César and Trujillo, Juan Pablo and Ortega, Arturo Gómez and González-Carmona, Juan Manuel and Urquiza, Edgar Adrián Franco},
  title = {Effect of Temperature on the Structure and Tribological Properties of Ti, TiN and Ti/TiN Coatings Deposited by Cathodic Arc PVD},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {823},
  doi = {10.3390/coatings14070823}
}
Kostenlos starten →