EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Spark Plasma Sintering of Industrial Microsilica and Commercial Nanosilica: Phase Formation, Density, and Mechanical Response

Kurmetbek Tuyskhan, Gulzhainat Akhmetova, Gulnara Ulyeva, Almas Yerzhanov

Ceramics · 09.11.2026 · 9 (11) · 128

DOI: 10.3390/ceramics9110128 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 09.11.2026. Verfasst von Kurmetbek Tuyskhan und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microsilica recovered from silicon-production off-gases offers a secondary feedstock for silica-based ceramics. This study evaluates its consolidation by spark plasma sintering (SPS), with purchased commercial nanosilica serving as a reference. Both feedstocks were processed at a monitored die temperature of 1300 °C, 50 MPa, and a 10 min hold. Characterization combined powder microscopy, qualitative X-ray diffraction, hydrostatic weighing, ultrasonic contact impedance (UCI), and axial compression. Mean hydrostatic densities were 2.246 ± 0.007 and 2.254 ± 0.007 g·cm−3 for microsilica and nanosilica, respectively. Mean maximum nominal stresses were 208 ± 13 and 188 ± 6 MPa for Ø14 × 2 mm disks; values are mean ± sample standard deviation (n = 3 per feedstock). The microsilica specimens exhibited a 10.3% higher mean maximum nominal stress under this loading configuration and higher comparative UCI indications. Both cooled ceramics showed reflections consistent with α-cristobalite. The study extends earlier waste-processing work through a comparison with commercial nanosilica that relates powder characteristics and phase identity to replicate property measurements under a common SPS schedule. The results demonstrate the material feasibility of consolidating microsilica waste into coherent ceramic bodies and support further development of this utilization route.

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Tuyskhan, K., Akhmetova, G., Ulyeva, G., & Yerzhanov, A. (2026). Spark Plasma Sintering of Industrial Microsilica and Commercial Nanosilica: Phase Formation, Density, and Mechanical Response. Ceramics, 9(11), 128. https://doi.org/10.3390/ceramics9110128

Vancouver

Tuyskhan K, Akhmetova G, Ulyeva G, Yerzhanov A. Spark Plasma Sintering of Industrial Microsilica and Commercial Nanosilica: Phase Formation, Density, and Mechanical Response. Ceramics. 2026;9(11):128. doi:10.3390/ceramics9110128

BibTeX
@article{Tuyskhan2026,
  author = {Tuyskhan, Kurmetbek and Akhmetova, Gulzhainat and Ulyeva, Gulnara and Yerzhanov, Almas},
  title = {Spark Plasma Sintering of Industrial Microsilica and Commercial Nanosilica: Phase Formation, Density, and Mechanical Response},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {11},
  pages = {128},
  doi = {10.3390/ceramics9110128}
}
Kostenlos starten →