EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behavior of Transparent Spinel Fabricated by Spark Plasma Sintering

Khadidja Hoggas, Salim Benaissa, Abdelbaki Cherouana, Sofiane Bouheroum, Abdenacer Assali, Mohamed Hamidouche, Gilbert Fantozzi

Ceramics · 31.05.2023 · 6 (2) · 1191-1209

DOI: 10.3390/ceramics6020072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 31.05.2023. Verfasst von Khadidja Hoggas und 6 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a transparent nanostructured ceramic magnesium aluminate spinel (MgAl2O4) was fabricated by Spark Plasma Sintering (SPS) from commercial spinel nano-powders at different temperatures (1300, 1350 and 1400 °C). The sintered samples were thoroughly examined to assess their microstructural, optical, and mechanical properties. Various techniques such as SEM, AFM, spectrophotometer with an integrating sphere, instrumented Vickers indenter, Pin-on-Disk tribometer, scratch tester, and sandblasting device were employed to characterize the sintered samples. The results indicated the significant impact of the sintering temperature on the properties of the spinel samples. Particularly, the samples sintered at T = 1350 °C exhibited the highest Real In-line Transmission (RIT = 72% at 550 nm and 80% at 1000 nm). These samples demonstrated the highest hardness value (HV = 16.7 GPa) compared to those sintered at 1300 °C (HV = 15.6 GPa) and 1400 °C (HV = 15.1 GPa). The measured fracture toughness of the sintered samples increased substantially with increasing sintering temperature. Similarly, the tribological study revealed that the friction coefficient of the sintered spinel samples increased with the sintering temperature, and the spinel sintered at 1350 °C exhibited the lowest wear rate. Additionally, sandblasting and scratch tests confirmed the significant influence of the sintering temperature on the mechanical properties of the fabricated spinels. Overall, the spinel sintered at 1350 °C presented the best compromise in terms of all the evaluated properties.

Zitieren

APA

Hoggas, K., Benaissa, S., Cherouana, A., Bouheroum, S., Assali, A., Hamidouche, M., & Fantozzi, G. (2023). Mechanical Behavior of Transparent Spinel Fabricated by Spark Plasma Sintering. Ceramics, 6(2), 1191-1209. https://doi.org/10.3390/ceramics6020072

Vancouver

Hoggas K, Benaissa S, Cherouana A, Bouheroum S, Assali A, Hamidouche M, et al. Mechanical Behavior of Transparent Spinel Fabricated by Spark Plasma Sintering. Ceramics. 2023;6(2):1191-1209. doi:10.3390/ceramics6020072

BibTeX
@article{Hoggas2023,
  author = {Hoggas, Khadidja and Benaissa, Salim and Cherouana, Abdelbaki and Bouheroum, Sofiane and Assali, Abdenacer and Hamidouche, Mohamed and Fantozzi, Gilbert},
  title = {Mechanical Behavior of Transparent Spinel Fabricated by Spark Plasma Sintering},
  journal = {Ceramics},
  year = {2023},
  volume = {6},
  number = {2},
  pages = {1191--1209},
  doi = {10.3390/ceramics6020072}
}
Kostenlos starten →