Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics
Materials · 13.07.2024 · 17 (14) · 3469
DOI: 10.3390/ma17143469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.07.2024. Verfasst von Satyavan Digole und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Cleveland State University, Cleveland, OH 44115, USA. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The versatility of titanium (Ti) allows it to be employed in various industries, from aerospace engineering to medical technology, highlighting its significance in modern manufacturing and engineering processes. Spark plasma sintering (SPS) is currently being explored to enhance its properties further and broaden its application range. The current study focuses on exploring and optimizing the effect of SPS temperature (800, 900, 1000, 1100, 1200, and 1400 °C) on pure Ti sintered at 60 MPa in a controlled argon environment with a dwell time of 5 min. All the prepared samples were highly dense with a relative density above 99%, but exhibited significant variations in grain size (10 to 57 µm), tensile yield strength (488 to 700 MPa), ultimate tensile strength (597 to 792 MPa), and ductility (4 to 7%). A microstructural investigation was performed using XRD, SEM, and EDS to predict the influence of sintering temperature on the formation of different phases. The XRD patterns of all sintered samples showed the presence of single-phase α-Ti with hexagonally close-packed Ti. This work is a step forward in optimizing SPS-processed Ti’s physical and mechanical properties for enhanced structural and biomedical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Cleveland State University, Cleveland, OH 44115, USA.
- Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA.
ORCID-Profile: Satyavan Digole, Sanoj Karki, Manoj Mugale, Amit Choudhari, Rajeev Kumar Gupta
Zitieren
APA
Digole, S., Karki, S., Mugale, M., Choudhari, A., Gupta, R. K., & Borkar, T. (2024). Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics. Materials, 17(14), 3469. https://doi.org/10.3390/ma17143469
Vancouver
Digole S, Karki S, Mugale M, Choudhari A, Gupta RK, Borkar T. Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics. Materials. 2024;17(14):3469. doi:10.3390/ma17143469
BibTeX
@article{Digole2024,
author = {Digole, Satyavan and Karki, Sanoj and Mugale, Manoj and Choudhari, Amit and Gupta, Rajeev Kumar and Borkar, Tushar},
title = {Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3469},
doi = {10.3390/ma17143469}
}
EUVIMED