EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Workability Parameters of Straw-Reinforced Earth-Based Materials for Extrusion-Based 3D Printing

Bushra Danish Talpur, Stefania Liuzzi, Alessandro Cannavale, Francesco Martellotta

Buildings · 28.06.2026 · 16 (13) · 2588

DOI: 10.3390/buildings16132588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 28.06.2026. Verfasst von Bushra Danish Talpur und 3 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite increasing interest in earth-based materials for additive manufacturing in construction, limited research has systematically investigated the workability parameters governing their suitability for extrusion-based 3D printing. This study evaluates the influence of wheat straw fiber content on the flowability, pumpability, extrudability, and buildability of earth-based mixtures for extrusion-based 3D printing applications. Four mixtures containing varying proportions of clay (76–100 wt%), wheat straw fiber (0–20 wt%), additives (0–4 wt%), and water were experimentally assessed and subsequently evaluated for compressive strength. Flowability was determined using modified flow tests; pumpability and extrudability were assessed through manual extrusion tools (triangular bag and grout gun), and buildability was evaluated using a modified compression test measuring green strength. Results showed that increasing the wheat straw fiber content from 5% to 20% reduced the flowability from 31.42% to 11.42%, despite corresponding increases in water content. The SP15 mixture (82% clay, 15% wheat straw fiber, 3% additive, and 35% water) exhibited the most balanced performance, achieving the lowest height reduction (17.14%) during buildability testing and demonstrating superior structural stability and compressive performance. The proposed methodology provides practical guidance for developing printable earth-based materials and supports the adoption of locally available, low-carbon materials in sustainable additive manufacturing for construction.

Zitieren

APA

Talpur, B. D., Liuzzi, S., Cannavale, A., & Martellotta, F. (2026). Evaluation of Workability Parameters of Straw-Reinforced Earth-Based Materials for Extrusion-Based 3D Printing. Buildings, 16(13), 2588. https://doi.org/10.3390/buildings16132588

Vancouver

Talpur BD, Liuzzi S, Cannavale A, Martellotta F. Evaluation of Workability Parameters of Straw-Reinforced Earth-Based Materials for Extrusion-Based 3D Printing. Buildings. 2026;16(13):2588. doi:10.3390/buildings16132588

BibTeX
@article{Talpur2026,
  author = {Talpur, Bushra Danish and Liuzzi, Stefania and Cannavale, Alessandro and Martellotta, Francesco},
  title = {Evaluation of Workability Parameters of Straw-Reinforced Earth-Based Materials for Extrusion-Based 3D Printing},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {2588},
  doi = {10.3390/buildings16132588}
}
Kostenlos starten →