EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of SA-Gel Hydrogel Printing Parameters for Extrusion-Based 3D Bioprinting

Weihong Chai, Yalong An, Xingli Wang, Zhe Yang, Qinghua Wei iD

Gels · 17.07.2025 · 11 (7) · 552

DOI: 10.3390/gels11070552 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 17.07.2025. Verfasst von Weihong Chai und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Material Engineering, Xi'an University, Xi'an 710065, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Special Project of Xi'an University under the Xi'an Science and Technology Program "S&T Personnel Service Enterprise Initiative for Universities and Research I…, Key Research and Development Program of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extrusion-based 3D bioprinting is prevalent in tissue engineering, but enhancing precision is critical as demands for functionality and accuracy escalate. Process parameters (nozzle diameter d, layer height h, printing speed v1, extrusion speed v2) significantly influence hydrogel deposition and structure formation. This study optimizes these parameters using an orthogonal experimental design and grey relational analysis. Hydrogel filament formability and the die swell ratio served as optimization objectives. A response mathematical model linking parameters to grey relational grade was established via support vector regression (SVR). Particle Swarm Optimization (PSO) then determined the optimal parameter combination: d = 0.6 mm, h = 0.3 mm, v1 = 8 mm/s, and v2 = 8 mm/s. Comparative experiments showed the optimized parameters predicted by the model with a mean error of 5.15% for printing precision, which outperformed random sets. This data-driven approach reduces uncertainties inherent in conventional simulation methods, enhancing predictive accuracy. The methodology establishes a novel framework for optimizing precision in extrusion-based 3D bioprinting.

Schlagwörter

Stichwörter der Autor:innen

extrusion swelling ratioextrusion-based 3D bioprintingfiber formability ratiohydrogelparameter optimization

Autor:innen und Institutionen

  • School of Mechanical and Material Engineering, Xi'an University, Xi'an 710065, China.
  • School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China.

ORCID-Profile: Qinghua Wei

Förderung

  • National Natural Science Foundation of China
  • Special Project of Xi'an University under the Xi'an Science and Technology Program "S&T Personnel Service Enterprise Initiative for Universities and Research I…
  • Key Research and Development Program of Shaanxi Province
  • Fundamental Research Funds for the Central Universities
  • Special Project of Xi’an University under the Xi’an Science and Technology Program “S&T Personnel Service Enterprise Initiative for Universities and Resear…

Zitieren

APA

Chai, W., An, Y., Wang, X., Yang, Z., & Wei, Q. (2025). Optimization of SA-Gel Hydrogel Printing Parameters for Extrusion-Based 3D Bioprinting. Gels, 11(7), 552. https://doi.org/10.3390/gels11070552

Vancouver

Chai W, An Y, Wang X, Yang Z, Wei Q. Optimization of SA-Gel Hydrogel Printing Parameters for Extrusion-Based 3D Bioprinting. Gels. 2025;11(7):552. doi:10.3390/gels11070552

BibTeX
@article{Chai2025,
  author = {Chai, Weihong and An, Yalong and Wang, Xingli and Yang, Zhe and Wei, Qinghua},
  title = {Optimization of SA-Gel Hydrogel Printing Parameters for Extrusion-Based 3D Bioprinting},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {7},
  pages = {552},
  doi = {10.3390/gels11070552}
}
Kostenlos starten →