Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform
Biosensors · 2023
DOI: 10.3390/bios13040446 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Supatinee Kongkaew und 6 weiteren Autor:innen. Beteiligte Einrichtung: Biosensors and Bioelectronics Centre, Division of Sensor and Actuator Systems, Department of Physics, Chemistry and Biology, Linköping University, SE…. Hauptthemen laut MEDLINE: Graphite, Biosensing Techniques. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Thailand Research Fund, Royal Golden Jubilee Ph.D. Scholarship.
Abstract (Originalsprache)
An innovative modular approach for facile design and construction of flexible microfluidic biosensor platforms based on a dry manufacturing “craft-and-stick” approach is developed. The design and fabrication of the flexible graphene paper electrode (GPE) unit and polyethylene tetraphthalate sheet (PET)6/adhesive fluidic unit are completed by an economic and generic xurographic craft approach. The GPE widths and the microfluidic channels can be constructed down to 300 μm and 200 μm, respectively. Both units were assembled by simple double-sided adhesive tapes into a microfluidic integrated GPE (MF-iGPE) that are flexible, thin (
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Biosensors and Bioelectronics Centre, Division of Sensor and Actuator Systems, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden.
- Center of Excellence for Trace Analysis and Biosensor, Prince of Songkla University, Hat Yai 90112, Songkhla, Thailand.
- Center of Excellence for Innovation in Chemistry, Faculty of Science, Prince of Songkla University, Hat Yai 90112, Songkhla, Thailand.
- Division of Health and Applied Sciences, Faculty of Science, Prince of Songkla University, Hat Yai 90112, Songkhla, Thailand.
- School of Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China.
- Division of Physical Science, Faculty of Science, Prince of Songkla University, Hat Yai 90112, Songkhla, Thailand.
ORCID-Profile: Lingyin Meng, Guozhen Liu
Förderung
- Thailand Research Fund
- Royal Golden Jubilee Ph.D. Scholarship
Zitieren
APA
Kongkaew, S., Meng, L., Limbut, W., Liu, G., Kanatharana, P., Thavarungkul, P., & Mak, W. C. (2023). Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform. Biosensors. https://doi.org/10.3390/bios13040446
Vancouver
Kongkaew S, Meng L, Limbut W, Liu G, Kanatharana P, Thavarungkul P, et al. Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform. Biosensors. 2023. doi:10.3390/bios13040446
BibTeX
@article{Kongkaew2023,
author = {Kongkaew, Supatinee and Meng, Lingyin and Limbut, Warakorn and Liu, Guozhen and Kanatharana, Proespichaya and Thavarungkul, Panote and Mak, Wing Cheung},
title = {Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform},
journal = {Biosensors},
year = {2023},
doi = {10.3390/bios13040446}
}
EUVIMED