Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling
Bioengineering · 13.11.2026 · 13 (11) · 1353
DOI: 10.3390/bioengineering13111353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 13.11.2026. Verfasst von Ghada H. Naguib und 6 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objectives
Studies have shown that nanoparticles can impart beneficial properties when integrated into resin composites; however, it remains unclear how this affects shear bond strength. This study aimed to evaluate the effects of composite formulation and zein-coated magnesium oxide nanoparticle (zMgO NP) concentration on shear bond strength (SBS) and failure mode following thermocycling.
Methods
A total of 180 extracted human molars were randomly allocated among four composite formulations and three zMgO NP concentrations (0%, 0.5%, and 1%; n = 15). Composite cylinders were bonded to prepared dentin surfaces and thermocycled for 10,000 cycles between 5 °C and 55 °C. SBS was analyzed using two-way ANOVA and post hoc multiple comparisons with Tukey’s test. Failure modes were assessed stereomicroscopically and analyzed using the chi-square test.
Results
The SBS of the modified composites in all groups significantly increased, with the 0.5% zMgO NP groups exhibiting the highest SBS. The 0.5% zMgO NPs N-Ceram group had the highest SBS overall. The unmodified Z350 composite exhibited the highest adhesive failure, while the control N-Flow composite demonstrated the highest cohesive failure. The modified conventional and flowable composites showed initially lower adhesive failure, which increased progressively as zMgO NPs increased. The bulk-fill composite initially showed higher adhesive failure, with the 0.5% group demonstrating lower adhesive failure and the 1% group exhibiting increased adhesive failure.
Conclusions
Adding zMgO NPs to resin composites improved SBS after thermocycling, with material- and concentration-dependent differences in failure-mode analysis. Further validation studies are needed to verify clinical viability.
Zitieren
APA
Naguib, G. H., Aljawi, R., Alqarni, S., Alsharif, D., Mazhar, J., Alnowaiser, A., & Hamed, M. T. (2026). Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling. Bioengineering, 13(11), 1353. https://doi.org/10.3390/bioengineering13111353
Vancouver
Naguib GH, Aljawi R, Alqarni S, Alsharif D, Mazhar J, Alnowaiser A, et al. Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling. Bioengineering. 2026;13(11):1353. doi:10.3390/bioengineering13111353
BibTeX
@article{Naguib2026,
author = {Naguib, Ghada H. and Aljawi, Rabab and Alqarni, Sarah and Alsharif, Dina and Mazhar, Jumana and Alnowaiser, Abeer and Hamed, Mohamed T.},
title = {Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {11},
pages = {1353},
doi = {10.3390/bioengineering13111353}
}
EUVIMED