EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Trueness and Precision of Intraoral Scanners for 3D-Printed Orthodontic Models with Attachments: An In Vitro Comparative Study

Fırat Oğuz iD, Handan Göze Oğuz, Sabahattin Bor iD

Bioengineering · 20.06.2026 · 13 (6) · 709

DOI: 10.3390/bioengineering13060709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 20.06.2026. Verfasst von Fırat Oğuz und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, Faculty of Dentistry, İnönü University, Malatya 44280, Türkiye. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Inonu University, İnönü University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Advances in additive manufacturing and CAD/CAM technologies have expanded the use of 3D-printed orthodontic models in digital aligner workflows. Intraoral scanners (IOS) are critical for accurately capturing attachment geometries and dental morphology during these workflows. However, comparative evidence regarding IOS accuracy in models with complex orthodontic structures remains limited. Therefore, this study aimed to compare the trueness and precision of five IOS using 3D-printed orthodontic models with attachments.

Methods

In this in vitro study, thirty independent single-arch 3D-printed models (either maxillary or mandibular) with orthodontic attachments were scanned twice with each IOS. The Smart Optics Vinyl laboratory scanner served as the reference scanner. Scans were aligned and superimposed in CloudCompare, and root mean square (RMS) deviation values were calculated to evaluate accuracy. Nonparametric Kruskal–Wallis and Dunn tests were applied (α = 0.05).

Results

Significant differences were found among scanners for both trueness and precision (p < 0.001). Primescan, TRIOS 3, and iTero element 5D demonstrated comparable trueness (p > 0.05) and outperformed Rapideye MI-1000 (p < 0.001). iTero element 2 plus showed slightly lower accuracy but remained clinically acceptable. Primescan achieved the highest precision, significantly exceeding iTero element 2 plus, iTero element 5D, and Rapideye MI-1000 (p < 0.01). TRIOS 3 also exhibited excellent repeatability, comparable to Primescan (p = 1.000).

Conclusions

All intraoral scanners, except Rapideye MI-1000, demonstrated accuracy levels generally considered clinically acceptable for digital orthodontic and additive manufacturing workflows. Primescan, TRIOS 3, and iTero element 5D exhibited similarly high trueness, while Primescan showed the most consistent precision. The ability of these scanners to reproduce fine anatomical details may improve the reliability of 3D-printed orthodontic models and in-office aligner production workflows.

Schlagwörter

Stichwörter der Autor:innen

3D-printingattachmentsdigital orthodonticsintraoral scannerorthodontic models

Autor:innen und Institutionen

  • Department of Orthodontics, Faculty of Dentistry, İnönü University, Malatya 44280, Türkiye.
  • MEF Dental Oral and Dental Health Clinic, Malatya 44280, Türkiye.

ORCID-Profile: Fırat Oğuz, Sabahattin Bor

Förderung

  • Inonu University
  • İnönü University

Zitieren

APA

Oğuz, F., Oğuz, H. G., & Bor, S. (2026). Trueness and Precision of Intraoral Scanners for 3D-Printed Orthodontic Models with Attachments: An In Vitro Comparative Study. Bioengineering, 13(6), 709. https://doi.org/10.3390/bioengineering13060709

Vancouver

Oğuz F, Oğuz HG, Bor S. Trueness and Precision of Intraoral Scanners for 3D-Printed Orthodontic Models with Attachments: An In Vitro Comparative Study. Bioengineering. 2026;13(6):709. doi:10.3390/bioengineering13060709

BibTeX
@article{Ouz2026,
  author = {Oğuz, Fırat and Oğuz, Handan Göze and Bor, Sabahattin},
  title = {Trueness and Precision of Intraoral Scanners for 3D-Printed Orthodontic Models with Attachments: An In Vitro Comparative Study},
  journal = {Bioengineering},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {709},
  doi = {10.3390/bioengineering13060709}
}
Kostenlos starten →