In Vitro Biofilm Formation on 3D-Printed, Milled, and Conventionally Manufactured Denture Base Resins
Bioengineering · 03.04.2026 · 13 (4) · 424
DOI: 10.3390/bioengineering13040424 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 03.04.2026. Verfasst von Michael Del Hougne und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Biofilm formation on denture base materials may contribute to oral diseases such as denture stomatitis and therefore represents an important factor in prosthodontic treatment. This in vitro study investigated biofilm formation on dental prosthetic materials manufactured by additive, subtractive, and conventional techniques. Disc-shaped specimens were fabricated from 3D-printed Denture Base Resin (Formlabs), milled Lucitone Digital Fit (Dentsply Sirona), and conventionally processed cold-polymerized PALAPress (Kulzer). Biofilm formation by Streptococcus mutans and Streptococcus sanguinis was assessed separately over a 21-day incubation period using crystal violet staining and photometric determination of optical density at eight predefined time points. Surface characteristics before and after microbial colonization were qualitatively evaluated by scanning electron microscopy. For S. mutans, significant material-dependent differences were observed only at selected time points, while overall biofilm accumulation remained low. In contrast, S. sanguinis exhibited pronounced and repeated differences, with milled PMMA generally showing lower biofilm accumulation compared with additively manufactured and conventionally processed materials. Overall, S. sanguinis formed significantly more biofilm than S. mutans across all materials and time points. These findings indicate that both manufacturing technique and bacterial species influence biofilm formation on denture base materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany.
- Department for Functional Materials in Medicine and Dentistry, University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany.
ORCID-Profile: Michael Del Hougne, Andrea Ewald, Tatjana Schilling, Philipp Stahlhut, Uwe Gbureck
Zitieren
APA
Del Hougne, M., Mitzscherling, A., Ewald, A., Schilling, T., Stahlhut, P., Gbureck, U., & Schmitter, M. (2026). In Vitro Biofilm Formation on 3D-Printed, Milled, and Conventionally Manufactured Denture Base Resins. Bioengineering, 13(4), 424. https://doi.org/10.3390/bioengineering13040424
Vancouver
Del Hougne M, Mitzscherling A, Ewald A, Schilling T, Stahlhut P, Gbureck U, et al. In Vitro Biofilm Formation on 3D-Printed, Milled, and Conventionally Manufactured Denture Base Resins. Bioengineering. 2026;13(4):424. doi:10.3390/bioengineering13040424
BibTeX
@article{DelHougne2026,
author = {Del Hougne, Michael and Mitzscherling, Alexander and Ewald, Andrea and Schilling, Tatjana and Stahlhut, Philipp and Gbureck, Uwe and Schmitter, Marc},
title = {In Vitro Biofilm Formation on 3D-Printed, Milled, and Conventionally Manufactured Denture Base Resins},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {4},
pages = {424},
doi = {10.3390/bioengineering13040424}
}
EUVIMED