Impact of 3D-Printed Tricalcium Phosphate Scaffold Polymorphism and Post-Processing Variations on Bone Regenerative Outcomes
Bioengineering · 28.12.2025 · 13 (1) · 34
DOI: 10.3390/bioengineering13010034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 28.12.2025. Verfasst von Nicholas Jose Iglesias und 9 weiteren Autor:innen. Beteiligte Einrichtung: DeWitt Daughtry Family Department of Surgery, University of Miami Miller School of Medicine, Miami, FL 33136, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Tricalcium phosphate (TCP) bioceramics, available as α- and β-polymorphs, are frequently employed in the production of three-dimensionally (3D) printed bone scaffolds. Although hydrothermal immersion processing (HP) and sintering (S) are commonly adopted as post-printing techniques for bioceramics, a comprehensive comparative analysis of their effects on the osteogenic performance of α- and β-polymorphs in vivo remains inadequately investigated. In this study, α-TCP and β-TCP scaffolds were fabricated via direct ink writing and subjected to hydrothermal immersion processing (α-TCP/HP) and sintering (β-TCP/S) prior to implantation in n = 12 skeletally mature sheep (n = 1 scaffold per group per animal), and the outcome variables were evaluated at 3 and 12 weeks postoperatively (n = 6 sheep per time point). The quantitative results showed no significant differences in bone deposition or scaffold resorption at 3 weeks postoperatively (p = 0.618 and p = 0.898, respectively). However, at 12 weeks, there was a significant increase in osteogenesis and scaffold resorption in the β-TCP/S cohort relative to the α-TCP/HP counterparts (p < 0.001 and p = 0.004, respectively). β-TCP scaffolds subjected to post-print sintering exhibited superior osteoconductive and resorptive profiles compared to hydrothermal immersion-processed α-TCP scaffolds over the 12-week healing period.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- DeWitt Daughtry Family Department of Surgery, University of Miami Miller School of Medicine, Miami, FL 33136, USA.
- University of Miami Miller School of Medicine, Miami, FL 33136, USA.
- Florida International University Herbert Wertheim College of Medicine, Miami, FL 33199, USA.
- Department of Biochemistry and Molecular Biology, University of Miami Miller School of Medicine, Miami, FL 33136, USA.
- Dr. John T. Macdonald Foundation Biomedical Nanotechnology Institute (BioNIUM), University of Miami, Miami, FL 33136, USA.
- Biomaterials and Regenerative Biology Division, NYU College of Dentistry, New York, NY 10010, USA.
ORCID-Profile: Nicholas Jose Iglesias, Sara E Munkwitz, Hana Shah, Nicholas A Mirsky, Adriana I Sandino, Vasudev Vivekanand Nayak, Lukasz Witek
Zitieren
APA
Iglesias, N. J., Munkwitz, S. E., Shah, H., Sturm, S. R., Mirsky, N. A., Sandino, A. I., Almada, R., Nayak, V. V., Witek, L., & Coelho, P. G. (2025). Impact of 3D-Printed Tricalcium Phosphate Scaffold Polymorphism and Post-Processing Variations on Bone Regenerative Outcomes. Bioengineering, 13(1), 34. https://doi.org/10.3390/bioengineering13010034
Vancouver
Iglesias NJ, Munkwitz SE, Shah H, Sturm SR, Mirsky NA, Sandino AI, et al. Impact of 3D-Printed Tricalcium Phosphate Scaffold Polymorphism and Post-Processing Variations on Bone Regenerative Outcomes. Bioengineering. 2025;13(1):34. doi:10.3390/bioengineering13010034
BibTeX
@article{Iglesias2025,
author = {Iglesias, Nicholas Jose and Munkwitz, Sara E and Shah, Hana and Sturm, Savanah R and Mirsky, Nicholas A and Sandino, Adriana I and Almada, Ricky and Nayak, Vasudev Vivekanand and Witek, Lukasz and Coelho, Paulo G},
title = {Impact of 3D-Printed Tricalcium Phosphate Scaffold Polymorphism and Post-Processing Variations on Bone Regenerative Outcomes},
journal = {Bioengineering},
year = {2025},
volume = {13},
number = {1},
pages = {34},
doi = {10.3390/bioengineering13010034}
}
EUVIMED