EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FEA-Based Stress–Strain Barometers as Forecasters for Corneal Refractive Power Change in Orthokeratology

Lo-Yu Wu, Wen-Pin Lin, Richard Wu, Lynn White iD, Ahmed Abass iD

Bioengineering · 09.02.2024 · 11 (2) · 166

DOI: 10.3390/bioengineering11020166 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 09.02.2024. Verfasst von Lo-Yu Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Power Mechanical Engineering, Nation Tsing Hua University, Hsinchu 300, Taiwan. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To improve the effectivity of patient-specific finite element analysis (FEA) to predict refractive power change (RPC) in rigid Ortho-K contact lens fitting. Novel eyelid boundary detection is introduced to the FEA model to better model the effects of the lid on lens performance, and stress and strain outcomes are investigated to identify the most effective FEA components to use in modelling.

Methods

The current study utilises fully anonymised records of 249 eyes, 132 right eyes, and 117 left eyes from subjects aged 14.1 ± 4.0 years on average (range 9 to 38 years), which were selected for secondary analysis processing. A set of custom-built MATLAB codes was built to automate the process from reading Medmont E300 height and distance files to processing and displaying FEA stress and strain outcomes. Measurements from before and after contact lens wear were handled to obtain the corneal surface change in shape and power. Tangential refractive power maps were constructed from which changes in refractive power pre- and post-Ortho-K wear were determined as the refractive power change (RPC). A total of 249 patient-specific FEA with innovative eyelid boundary detection and 3D construction analyses were automatically built and run for every anterior eye and lens combination while the lens was located in its clinically detected position. Maps of four stress components: contact pressure, Mises stress, pressure, and maximum principal stress were created in addition to maximum principal logarithmic strain maps. Stress and strain components were compared to the clinical RPC maps using the two-dimensional (2D) normalised cross-correlation and structural similarity (SSIM) index measure.

Results

On the one hand, the maximum principal logarithmic strain recorded the highest moderate 2D cross-correlation area of 8.6 ± 10.3%, and contact pressure recorded the lowest area of 6.6 ± 9%. Mises stress recorded the second highest moderate 2D cross-correlation area with 8.3 ± 10.4%. On the other hand, when the SSIM index was used to compare the areas that were most similar to the clinical RPC, maximum principal stress was the most similar, with an average strong similarity percentage area of 26.5 ± 3.3%, and contact pressure was the least strong similarity area of 10.3 ± 7.3%. Regarding the moderate similarity areas, all components were recorded at around 34.4% similarity area except the contact pressure, which was down to 32.7 ± 5.8%.

Conclusions

FEA is an increasingly effective tool in being able to predict the refractive outcome of Ortho-K treatment. Its accuracy depends on identifying which clinical and modelling metrics contribute to the most accurate prediction of RPC with minimal ocular complications. In terms of clinical metrics, age, Intra-ocular pressure (IOP), central corneal thickness (CCT), surface topography, lens decentration and the 3D eyelid effect are all important for effective modelling. In terms of FEA components, maximum principal stress was found to be the best FEA barometer that can be used to predict the performance of Ortho-K lenses. In contrast, contact pressure provided the worst stress performance. In terms of strain, the maximum principal logarithmic strain was an effective strain barometer.

Schlagwörter

Stichwörter der Autor:innen

FEAOrtho-Kcontact lensescorneaeyerefractive power change

Autor:innen und Institutionen

  • Department of Power Mechanical Engineering, Nation Tsing Hua University, Hsinchu 300, Taiwan.
  • Research and Development Center, Brighten Optix Corporation, Taipei 111, Taiwan.
  • Department of Optometry, University of Kang Ning, Taipei 114, Taiwan.
  • College of Optometry, Pacific University, Forest Grove, OR 97116, USA.
  • Research and Development Department, LWVision, Leicester LE18 1DF, UK.
  • Department of Materials, Design and Manufacturing Engineering, School of Engineering, University of Liverpool, Liverpool L69 3GH, UK.

ORCID-Profile: Lynn White, Ahmed Abass

Zitieren

APA

Wu, L. Y., Lin, W. P., Wu, R., White, L., & Abass, A. (2024). FEA-Based Stress–Strain Barometers as Forecasters for Corneal Refractive Power Change in Orthokeratology. Bioengineering, 11(2), 166. https://doi.org/10.3390/bioengineering11020166

Vancouver

Wu LY, Lin WP, Wu R, White L, Abass A. FEA-Based Stress–Strain Barometers as Forecasters for Corneal Refractive Power Change in Orthokeratology. Bioengineering. 2024;11(2):166. doi:10.3390/bioengineering11020166

BibTeX
@article{Wu2024,
  author = {Wu, Lo-Yu and Lin, Wen-Pin and Wu, Richard and White, Lynn and Abass, Ahmed},
  title = {FEA-Based Stress–Strain Barometers as Forecasters for Corneal Refractive Power Change in Orthokeratology},
  journal = {Bioengineering},
  year = {2024},
  volume = {11},
  number = {2},
  pages = {166},
  doi = {10.3390/bioengineering11020166}
}
Kostenlos starten →