Design-Oriented Kinematic and Dynamic Modeling of the Open-Source BCN3D MOVEO Robotic Arm
Applied Sciences · 20.11.2026 · 16 (22) · 11517
DOI: 10.3390/app162211517 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.11.2026. Verfasst von Konstantinos Zois und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Open-source robotic manipulators provide accessible platforms for education, research, and rapid prototyping, motivating systematic methods for their modeling and engineering assessment. This study presents a unified design-oriented framework for the existing open-source BCN3D MOVEO robotic manipulator, integrating kinematic and dynamic modeling, numerical verification, sensitivity analysis, and actuator assessment. Forward and inverse kinematics are formulated using the modified Denavit–Hartenberg convention, including branch, orientation-compatibility, and singularity analyses. An Euler–Lagrange dynamic model is developed using CAD-derived inertial properties calibrated to slicer-predicted masses for additively manufactured components. Numerical consistency is examined through structural and energy checks, inverse and forward dynamics, and an independent Newton–Euler comparison. Sensitivity analysis evaluates the influence of prescribed inertial-parameter variations on predicted joint torques. A nominal design-stage actuator assessment incorporates adopted motor torque–speed curves, transmission ratios, efficiencies, and motor arrangements. Joint 2 exhibited the highest torque demand (7.45 N·m) but 35.57% utilization, whereas joint 4 reached 96.67% under a demanding triangular motion profile; quintic time scaling reduced this to 78.28%. A 10% underestimation of mass or center-of-mass distances could eliminate the nominal torque reserve at joint 4. Overall, the framework provides a systematic basis for design-stage evaluation of predicted dynamic behavior, estimated actuator capacity, and parameter sensitivity in open-source robotic manipulators.
Zitieren
APA
Zois, K., Sagias, V. D., Stergiou, C., & Zacharia, P. (2026). Design-Oriented Kinematic and Dynamic Modeling of the Open-Source BCN3D MOVEO Robotic Arm. Applied Sciences, 16(22), 11517. https://doi.org/10.3390/app162211517
Vancouver
Zois K, Sagias VD, Stergiou C, Zacharia P. Design-Oriented Kinematic and Dynamic Modeling of the Open-Source BCN3D MOVEO Robotic Arm. Applied Sciences. 2026;16(22):11517. doi:10.3390/app162211517
BibTeX
@article{Zois2026,
author = {Zois, Konstantinos and Sagias, Vasileios D. and Stergiou, Constantinos and Zacharia, Paraskevi},
title = {Design-Oriented Kinematic and Dynamic Modeling of the Open-Source BCN3D MOVEO Robotic Arm},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11517},
doi = {10.3390/app162211517}
}
EUVIMED