EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design and Simulation of New Inverse Kinematic Algorithm to Manipulate a 5-DOF Humanoid Robotic Arm

Ammar A. Al-Hamadani, Maad Kamal Al-Anni, Ayad Mahmood Kwad, Hugot Pichon, Gamil R. S. Qaid, Najran Nasser Hamood

Al-Iraqia Journal for Scientific Engineering Research · 19.06.2026 · 5 (2) · 56-66

DOI: 10.58564/ijser.5.2.2026.371 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Iraqia Journal for Scientific Engineering Research, online erschienen am 19.06.2026. Verfasst von Ammar A. Al-Hamadani und 5 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a new solution of inverse kinematics was derived and programmed as an algorithm. The algorithm was coded and embedded in a MATLAB simulation program to manipulate a 5-DOF Humanoid Robotic Arm (HRA) and assess its reaching accuracy. The algorithm was designed as follows: joint frames were modelled based on the Denavit-Hartenberg (D-H) concept. Configuration for each joint frame was designed using the proposed D-H parameters. Forward kinematic (FK) equations were derived using the designed frames configuration. The inverse kinematic problem was solved (derived) using an analytical method to find five joint angles for the desired location and orientation. IK equations were derived from the FK transformation matrix for the given location and orientation to revers back the joint angles. The Graphical User Interface (GUI) was designed using MATLAB to simulate the proposed FK/IK algorithm. A group of desired locations was handled using the GUI to show the resultant pose of the HRA. The accuracy of the proposed IK was assessed by means of positional error. The lowest and highest average positional errors achieved were (0.026 and 0.79) cm, respectively.

Zitieren

APA

Al-Hamadani, A. A., Al-Anni, M. K., Kwad, A. M., Pichon, H., Qaid, G. R. S., & Hamood, N. N. (2026). Design and Simulation of New Inverse Kinematic Algorithm to Manipulate a 5-DOF Humanoid Robotic Arm. Al-Iraqia Journal for Scientific Engineering Research, 5(2), 56-66. https://doi.org/10.58564/ijser.5.2.2026.371

Vancouver

Al-Hamadani AA, Al-Anni MK, Kwad AM, Pichon H, Qaid GRS, Hamood NN. Design and Simulation of New Inverse Kinematic Algorithm to Manipulate a 5-DOF Humanoid Robotic Arm. Al-Iraqia Journal for Scientific Engineering Research. 2026;5(2):56-66. doi:10.58564/ijser.5.2.2026.371

BibTeX
@article{AlHamadani2026,
  author = {Al-Hamadani, Ammar A. and Al-Anni, Maad Kamal and Kwad, Ayad Mahmood and Pichon, Hugot and Qaid, Gamil R. S. and Hamood, Najran Nasser},
  title = {Design and Simulation of New Inverse Kinematic Algorithm to Manipulate a 5-DOF Humanoid Robotic Arm},
  journal = {Al-Iraqia Journal for Scientific Engineering Research},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {56--66},
  doi = {10.58564/ijser.5.2.2026.371}
}
Kostenlos starten →