EUVIMEDEUVIMED entdecken
Crossref

Flying Vines: Design, Modeling, and Control of a Soft Aerial Robotic Arm

Rianna Jitosho, Crystal E. Winston, Shengan Yang, Jinxin Li, Maxwell Ahlquist, Nicholas John Woehrle, C. Karen Liu, Allison M. Okamura

IEEE Robotics and Automation Letters · 2025-10 · 10 (10) · 10514-10521

DOI: 10.1109/lra.2025.3598643 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Robotics and Automation Letters, 2025-10. Verfasst von Rianna Jitosho und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Achievement Rewards for College Scientists, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aerial robotic arms aim to enable inspection and interaction in otherwise hard-to-reach areas from the air. However, many aerial manipulators feature bulky or heavy robot manipulators mounted to large, high-payload aerial vehicles. Instead, we propose an aerial robotic arm with low mass and a small stowed configuration called a “flying vine.” The flying vine consists of a small, maneuverable quadrotor equipped with a soft, growing, inflated beam as the arm. This soft robot arm is underactuated, and positioning of the end effector is achieved by controlling the coupled quadrotor-vine dynamics. In this work, we present the flying vine design and a modeling and control framework for tracking desired end effector trajectories. The dynamic model leverages data-driven modeling methods and introduces bilinear interpolation to account for time-varying dynamic parameters. We use trajectory optimization to plan quadrotor controls that produce desired end effector motions. Experimental results on a physical prototype demonstrate that our framework enables the flying vine to perform high-speed end effector tracking, laying a foundation for performing dynamic maneuvers with soft aerial manipulators.

Förderung

  • Achievement Rewards for College Scientists
  • National Science Foundation

Zitieren

APA

Jitosho, R., Winston, C. E., Yang, S., Li, J., Ahlquist, M., Woehrle, N. J., Liu, C. K., & Okamura, A. M. (2025). Flying Vines: Design, Modeling, and Control of a Soft Aerial Robotic Arm. IEEE Robotics and Automation Letters, 10(10), 10514-10521. https://doi.org/10.1109/lra.2025.3598643

Vancouver

Jitosho R, Winston CE, Yang S, Li J, Ahlquist M, Woehrle NJ, et al. Flying Vines: Design, Modeling, and Control of a Soft Aerial Robotic Arm. IEEE Robotics and Automation Letters. 2025;10(10):10514-10521. doi:10.1109/lra.2025.3598643

BibTeX
@article{Jitosho2025,
  author = {Jitosho, Rianna and Winston, Crystal E. and Yang, Shengan and Li, Jinxin and Ahlquist, Maxwell and Woehrle, Nicholas John and Liu, C. Karen and Okamura, Allison M.},
  title = {Flying Vines: Design, Modeling, and Control of a Soft Aerial Robotic Arm},
  journal = {IEEE Robotics and Automation Letters},
  year = {2025},
  volume = {10},
  number = {10},
  pages = {10514--10521},
  doi = {10.1109/lra.2025.3598643}
}
Kostenlos starten →