EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Welding Deformation Using the Thermal Elastic–Plastic Finite Element Method by Considering Welding Interpass Temperature

Young-Hwan Han, Hun-Bong Lim iD, Tae-Sung Shin, Hyun-Ik Yang iD

Materials · 24.07.2024 · 17 (15) · 3656

DOI: 10.3390/ma17153656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.07.2024. Verfasst von Young-Hwan Han und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Design Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we propose a method for predicting welding deformation caused by multi-pass welding using the thermal elastic–plastic finite element method (TEP-FEM) by considering the interpass temperature. This method increases the interpass temperature, which has not been considered in the existing TEP-FEM, from 200 °C to 1000 °C, and simultaneously performs thermal and mechanical analyses. In addition, this method can also evaluate temperature history and the time it takes to weld. By predicting the welding deformation using this method, angular distortion prediction was reduced from 16.75 mm to 10.9 mm compared to the case where the interpass temperature was cooled to room temperature. Additionally, the deformation error was significantly reduced from 6.14% to 2.92% compared to that of the strain as directed boundary method used in a previous study. Additionally, our research demonstrated that interpass temperatures above 800 °C can result in increased deformation errors. In conclusion, it is essential to select an appropriate temperature to minimize deformation error.

Schlagwörter

Stichwörter der Autor:innen

SUS304finite element methodmulti-pass weldingthermal elastic–plastic finite element methodwelding deformation

Autor:innen und Institutionen

  • Department of Mechanical Design Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea.
  • Department of Mechanical Design Engineering, Myongji College, 134 Gajwa-ro, Seodaemun-gu, Seoul 03656, Republic of Korea.
  • Textile Innovation R&D Department, Korea Institute of Industrial Technology (KITECH), 143 Hanggaul-ro, Sangnok-gu, Ansan-si 15588, Republic of Korea.

ORCID-Profile: Hun-Bong Lim, Hyun-Ik Yang

Zitieren

APA

Han, Y. H., Lim, H. B., Shin, T. S., & Yang, H. I. (2024). Prediction of Welding Deformation Using the Thermal Elastic–Plastic Finite Element Method by Considering Welding Interpass Temperature. Materials, 17(15), 3656. https://doi.org/10.3390/ma17153656

Vancouver

Han YH, Lim HB, Shin TS, Yang HI. Prediction of Welding Deformation Using the Thermal Elastic–Plastic Finite Element Method by Considering Welding Interpass Temperature. Materials. 2024;17(15):3656. doi:10.3390/ma17153656

BibTeX
@article{Han2024,
  author = {Han, Young-Hwan and Lim, Hun-Bong and Shin, Tae-Sung and Yang, Hyun-Ik},
  title = {Prediction of Welding Deformation Using the Thermal Elastic–Plastic Finite Element Method by Considering Welding Interpass Temperature},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {15},
  pages = {3656},
  doi = {10.3390/ma17153656}
}
Kostenlos starten →