Analysis of the Mechanical Behavior of Virgin and Virgin-Recycled Polystyrene
Applied Sciences · 07.08.2026 · 16 (16) · 7873
DOI: 10.3390/app16167873 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.08.2026. Verfasst von Aaron Guerrero-Basilio und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consejo Mexiquense de Ciencia y Tecnología.
Abstract (Originalsprache)
General-purpose polystyrene (GPPS) is widely used in packaging and insulation, although its recyclability poses environmental challenges that require circular economy strategies. The objective of this study was to evaluate the mechanical and tribological behavior of virgin GPPS (100%N), a 50% virgin–50% recycled blend (50N–50R), and 100% recycled GPPS (100%R), processed in Mexico under controlled injection molding conditions. Micro-tensile, flexural, surface roughness, and sliding wear (pin-on-disk) tests were conducted in accordance with ASTM/ANSI standards. The results show that virgin GPPS exhibited the highest strength (micro-tensile: 31.1 MPa; flexural: 87.8 MPa), while the 50N–50R blend maintained comparable tensile strength (27.5 MPa) with greater ductility, making it viable for secondary applications. Recycled GPPS exhibited a significant reduction in strength (micro-tensile: 18.6 MPa; flexural: 41.1 MPa), although with greater deformability. In tribological tests, the coefficients of friction were 0.480 (100%N), 0.128 (50N–50R), and 0.143 (100%R), all with relative errors of less than 4%, confirming statistical validity. Surface roughness analysis showed that the virgin material had the most uniform surface (Ra = 1.0 µm), while the blends exhibited greater variation (Ra ≈ 1.2 µm). In conclusion, although recycled GPPS has limitations compared to virgin material, it retains acceptable mechanical and tribological properties for non-structural applications. These findings support its potential in circular economy strategies in Mexico and provide a framework for countries with similar recycling infrastructure conditions.
Förderung
- Consejo Mexiquense de Ciencia y Tecnología
Zitieren
APA
Guerrero-Basilio, A., López-Perrusquia, N., Doñu-Ruíz, M. A., García-Bustos, E. D., Vanegas, L. G., López-Velázquez, A., & Huitrón, D. S. (2026). Analysis of the Mechanical Behavior of Virgin and Virgin-Recycled Polystyrene. Applied Sciences, 16(16), 7873. https://doi.org/10.3390/app16167873
Vancouver
Guerrero-Basilio A, López-Perrusquia N, Doñu-Ruíz MA, García-Bustos ED, Vanegas LG, López-Velázquez A, et al. Analysis of the Mechanical Behavior of Virgin and Virgin-Recycled Polystyrene. Applied Sciences. 2026;16(16):7873. doi:10.3390/app16167873
BibTeX
@article{GuerreroBasilio2026,
author = {Guerrero-Basilio, Aaron and López-Perrusquia, Noé and Doñu-Ruíz, Marco Antonio and García-Bustos, Ernesto David and Vanegas, Leopoldo García and López-Velázquez, Andrés and Huitrón, David Sánchez},
title = {Analysis of the Mechanical Behavior of Virgin and Virgin-Recycled Polystyrene},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {16},
pages = {7873},
doi = {10.3390/app16167873}
}
EUVIMED