Investigation into the mechanical and thermal properties of lightweight mortar using commercial beads or recycled expanded polystyrene
Open Engineering · 09.04.2024 · 14 (1)
DOI: 10.1515/eng-2022-0592 ↗Kurz gefasst
Fachartikel in der Zeitschrift Open Engineering, online erschienen am 09.04.2024. Verfasst von Rana Shabbar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The addition of recycled expanded polystyrene (EPS) in cement mortar is a key to enhancing buildings’ insulation and reducing energy consumption. The main objective of this study is to improve the thermal conductivity of lightweight mortar (LWM) by using the EPS. Also, to overcome the segregation problem when increasing the EPS proportion by more than 70% by volume, slurry sand was used. To achieve that, more EPS waste is required to produce an LWM with less cement and natural resources (sand) content. The effect of different percentages and particle sizes of the EPS either virgin or grated on the workability, density, compressive, flexural strength, and thermal conductivity were investigated by using the EPS with the range of 0, 75, 80, and 85% by mortar’s volume. The results exposed that LWM with grated EPS waste had greater physical and mechanical properties than with EPS beads because it has low void content and suitable distribution. In addition, mortar with 85% grated EPS had similar properties than that with 75% EPS beads. Accordingly, EPS should be grinded to increase its volumetric percentage in the mixture. Also, electron microscopy was used as an integral technique to study surface morphology between mortar components and the EPS.
Zitieren
APA
Shabbar, R., Almusawi, A. M., & Taher, J. K. (2024). Investigation into the mechanical and thermal properties of lightweight mortar using commercial beads or recycled expanded polystyrene. Open Engineering, 14(1). https://doi.org/10.1515/eng-2022-0592
Vancouver
Shabbar R, Almusawi AM, Taher JK. Investigation into the mechanical and thermal properties of lightweight mortar using commercial beads or recycled expanded polystyrene. Open Engineering. 2024;14(1). doi:10.1515/eng-2022-0592
BibTeX
@article{Shabbar2024,
author = {Shabbar, Rana and Almusawi, Aqil Mousa and Taher, Jaber Kadhim},
title = {Investigation into the mechanical and thermal properties of lightweight mortar using commercial beads or recycled expanded polystyrene},
journal = {Open Engineering},
year = {2024},
volume = {14},
number = {1},
doi = {10.1515/eng-2022-0592}
}
EUVIMED