EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Behavior of Injection‐Molded Nylon 6 Composites With Virgin and Field‐Exposed Waste‐Recycled Blends

Chundu Gyem Tamang, Allan Manalo, Paulomi (Polly) Burey, Wahid Ferdous, Tristan Shelley, Mayur Patel, Tony Chapman

Polymer Composites · 10.11.2026 · 47 (21) · 19382-19402

DOI: 10.1002/pc.71549 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 26.08.2026. Verfasst von Chundu Gyem Tamang und 6 weiteren Autor:innen. Die Arbeit nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Education, Australian Government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Every year, more than 18,600 metric tonnes of glass fiber‐reinforced Nylon 6 composite waste from sucker rod guides used in downhole oil and gas applications are landfilled due to uncertainty about retained performance after prolonged service exposure. This study addresses this issue by evaluating the physical, mechanical, thermal, chemical, and microstructural properties of injection‐molded composites produced by blending virgin and field‐exposed Nylon 6 at different weight ratios (0%–100% recycled content). Results showed maximum reductions of only 30%, 21%, and 25% in tensile, flexural, and impact strength, respectively, due to fiber shortening below the critical fiber length ( L c ). No significant changes were observed in decomposition behavior, chemical structure, elemental composition, or physical properties, even for 100% recycled Nylon 6, apart from a reduction in glass transition temperature. These results show that mechanically recycled Nylon 6 composites recovered from downhole service can be reprocessed and blended with virgin material while maintaining sufficient mechanical and thermal performance, supporting their potential use in secondary polymer composite applications.

Förderung

  • Department of Education, Australian Government

Zitieren

APA

Tamang, C. G., Manalo, A., Burey, P. P., Ferdous, W., Shelley, T., Patel, M., & Chapman, T. (2026). Behavior of Injection‐Molded Nylon 6 Composites With Virgin and Field‐Exposed Waste‐Recycled Blends. Polymer Composites, 47(21), 19382-19402. https://doi.org/10.1002/pc.71549

Vancouver

Tamang CG, Manalo A, Burey PP, Ferdous W, Shelley T, Patel M, et al. Behavior of Injection‐Molded Nylon 6 Composites With Virgin and Field‐Exposed Waste‐Recycled Blends. Polymer Composites. 2026;47(21):19382-19402. doi:10.1002/pc.71549

BibTeX
@article{Tamang2026,
  author = {Tamang, Chundu Gyem and Manalo, Allan and Burey, Paulomi (Polly) and Ferdous, Wahid and Shelley, Tristan and Patel, Mayur and Chapman, Tony},
  title = {Behavior of Injection‐Molded Nylon 6 Composites With Virgin and Field‐Exposed Waste‐Recycled Blends},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {21},
  pages = {19382--19402},
  doi = {10.1002/pc.71549}
}
Kostenlos starten →