EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Printing Angle and Resin Type on the Flexural Strength of 3D-Printed Dental Materials

Maria Francesca Sfondrini, Maurizio Pascadopoli, Michael Cerri, Claudia Todaro, Federica Gariboldi, Andrea Scribante

Applied Sciences · 07.11.2025 · 15 (22) · 11858

DOI: 10.3390/app152211858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.11.2025. Verfasst von Maria Francesca Sfondrini und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing is growing rapidly in applied dentistry. To print faster, increase workflow, and minimise resin consumption, it is important to use the right printer and correct printing orientation. This report aims to analyse whether different printing orientations and types of printing materials could affect the flexural strength of a series of photopolymerisable resin samples. Seven different dental light-curing resins (Keyguide, C&B, Ivory, Vertysguide, Bite, Tera, and Nextdent Cast) and a single modern digital light processing (DLP) 3D printer (Moon Night) were used for this purpose. Different printing orientations (0°, 45°, and 90°) were evaluated. The resin specimens were designed using 3D Builder 20.0.4.0, MeshMixer 3.5.0 and Chitubox software 2.0.8. A total of 15 specimens (five for each orientation evaluated) in the shape of a rectangular parallelepiped with dimensions of 2 mm × 2 mm × 25 mm were produced for each of the seven selected resin materials with the Moon Night printer. After printing and post-processing (MoonWash 2 and MoonLight 2), each resin specimen was subjected to a mechanical test with a universal testing machine. After breaking the specimen, the flexural strength values were recorded using Bluehill computer software (Instron Corporation, Canton, MA, USA). According to the obtained results, the build angle does not affect the flexural strength of the printed products, whereas the difference occurs due to the different printing materials used.

Zitieren

APA

Sfondrini, M. F., Pascadopoli, M., Cerri, M., Todaro, C., Gariboldi, F., & Scribante, A. (2025). Effect of Printing Angle and Resin Type on the Flexural Strength of 3D-Printed Dental Materials. Applied Sciences, 15(22), 11858. https://doi.org/10.3390/app152211858

Vancouver

Sfondrini MF, Pascadopoli M, Cerri M, Todaro C, Gariboldi F, Scribante A. Effect of Printing Angle and Resin Type on the Flexural Strength of 3D-Printed Dental Materials. Applied Sciences. 2025;15(22):11858. doi:10.3390/app152211858

BibTeX
@article{Sfondrini2025,
  author = {Sfondrini, Maria Francesca and Pascadopoli, Maurizio and Cerri, Michael and Todaro, Claudia and Gariboldi, Federica and Scribante, Andrea},
  title = {Effect of Printing Angle and Resin Type on the Flexural Strength of 3D-Printed Dental Materials},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {22},
  pages = {11858},
  doi = {10.3390/app152211858}
}
Kostenlos starten →