EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Upper Limb Orthoses: Integrating Topology Optimization and 3D Printing for Custom Fit and Function

Stefanos Voulgaris, Charoula Kousiatza, George Kazakis, Konstantinos-Iason Ypsilantis, Dimitrios Galanis, Chara Ch. Mitropoulou, Maria Gkara, Stelios K. Georgantzinos, Konstantinos Soultanis, Nikos D. Lagaros

Applied Sciences · 16.01.2025 · 15 (2) · 827

DOI: 10.3390/app15020827 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.01.2025. Verfasst von Stefanos Voulgaris und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: OrThOP3Dics project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Customized wrist splints, particularly for upper extremity orthoses like wrist support braces, are commonly used across numerous clinical scenarios. However, the traditional process for producing personalized wrist splints is largely manual and highly dependent on the expertise of orthopedic specialists. This experience-based approach often leads to suboptimal outcomes, necessitating further refinement of the designs. Recent advancements in Additive Manufacturing (AM) have brought significant innovation to various industries, including orthopedics. This study aims to present a comprehensive methodology that integrates advanced design tools, like 3D Scanning, with digital manufacturing techniques to produce tailored wrist splints. The produced hand brace aims to offer enhanced mechanical performance and comfort by precisely fitting an individual’s anatomy while minimizing material usage and weight. To achieve optimal design efficiency, the study explores the application of a topology optimization (TO) approach for design, while the manufacturing process utilizes Fused Deposition Modeling (FDM), an evolving technology within the additive manufacturing (AM) sector.

Förderung

  • OrThOP3Dics project

Zitieren

APA

Voulgaris, S., Kousiatza, C., Kazakis, G., Ypsilantis, K., Galanis, D., Mitropoulou, C. C., Gkara, M., Georgantzinos, S. K., Soultanis, K., & Lagaros, N. D. (2025). Upper Limb Orthoses: Integrating Topology Optimization and 3D Printing for Custom Fit and Function. Applied Sciences, 15(2), 827. https://doi.org/10.3390/app15020827

Vancouver

Voulgaris S, Kousiatza C, Kazakis G, Ypsilantis K, Galanis D, Mitropoulou CC, et al. Upper Limb Orthoses: Integrating Topology Optimization and 3D Printing for Custom Fit and Function. Applied Sciences. 2025;15(2):827. doi:10.3390/app15020827

BibTeX
@article{Voulgaris2025,
  author = {Voulgaris, Stefanos and Kousiatza, Charoula and Kazakis, George and Ypsilantis, Konstantinos-Iason and Galanis, Dimitrios and Mitropoulou, Chara Ch. and Gkara, Maria and Georgantzinos, Stelios K. and Soultanis, Konstantinos and Lagaros, Nikos D.},
  title = {Upper Limb Orthoses: Integrating Topology Optimization and 3D Printing for Custom Fit and Function},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {2},
  pages = {827},
  doi = {10.3390/app15020827}
}
Kostenlos starten →