EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Custom Shoe Sole Design and Modeling Toward 3D Printing

Ali Zolfagharian, Mohammad Lakhi, Sadegh Ranjbar, Mahdi Bodaghi

International Journal of Bioprinting · 02.08.2024 · 7 (4) · 396

DOI: 10.18063/ijb.v7i4.396 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Ali Zolfagharian und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Deakin University, Geelong, Australia. Die Arbeit wurde bisher 45-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a design procedure for improving an individual’s footwear comfort with body weight index and activity requirements by customized three-dimensional (3D)-printed shoe midsole lattice structure. This method guides the selection of customized 3D-printed fabrications incorporating both physical and geometrical properties that meet user demands. The analysis of the lattice effects on minimizing the stress on plantar pressure was performed by initially creating various shoe midsole lattice structures designed. An appropriate common 3D printable material was selected along with validating its viscoelastic properties using finite element analysis. The lattice structure designs were analyzed under various loading conditions to investigate the suitability of the method in fabricating a customized 3D-printed shoe midsole based on the individual’s specifications using a single material with minimum cost, time, and material use.

Schlagwörter

Stichwörter der Autor:innen

3D printing4D printingCustomizationPolyurethaneShoeSoleViscoelastic

Autor:innen und Institutionen

  • School of Engineering, Deakin University, Geelong, Australia.
  • Department of Mechanical Engineering, University of Birjand, Birjand, Iran.
  • Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran.
  • Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham NG11 8NS, UK.

Zitieren

APA

Zolfagharian, A., Lakhi, M., Ranjbar, S., & Bodaghi, M. (2024). Custom Shoe Sole Design and Modeling Toward 3D Printing. International Journal of Bioprinting, 7(4), 396. https://doi.org/10.18063/ijb.v7i4.396

Vancouver

Zolfagharian A, Lakhi M, Ranjbar S, Bodaghi M. Custom Shoe Sole Design and Modeling Toward 3D Printing. International Journal of Bioprinting. 2024;7(4):396. doi:10.18063/ijb.v7i4.396

BibTeX
@article{Zolfagharian2024,
  author = {Zolfagharian, Ali and Lakhi, Mohammad and Ranjbar, Sadegh and Bodaghi, Mahdi},
  title = {Custom Shoe Sole Design and Modeling Toward 3D Printing},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {7},
  number = {4},
  pages = {396},
  doi = {10.18063/ijb.v7i4.396}
}
Kostenlos starten →